Difference between revisions of "Setting ActiveEye For Night Only"

From X10Wiki
Jump to: navigation, search
 
(Question)
Line 1: Line 1:
 
==Question==
 
==Question==
 +
 +
''How do I set the ActiveEye to only work at night?''
 +
 +
==Answer==
  
 
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:  
 
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:  
Line 5: Line 9:
 
Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:
 
Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:
  
The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
+
*The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
The red light blinks '''twice''' if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn.
+
*The red light blinks '''twice''' if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn.
The red light blinks '''three''' times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn.
+
*The red light blinks '''three''' times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn.
The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.
+
*The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.
  
 
To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.
 
To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.
  
 
Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks.
 
Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks.

Revision as of 22:43, 13 September 2006

Question

How do I set the ActiveEye to only work at night?

Answer

To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:

Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:

  • The red light blinks once if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
  • The red light blinks twice if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn.
  • The red light blinks three times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn.
  • The red light blinks four times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.

To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.

Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks.