Difference between revisions of "Setting Up The IR Extender Portion"

From X10Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
==Answer==
 
==Answer==
  
*Make sure the Video Receiver is positioned so that you can point your remote at the LED on its front.
+
#Make sure the Video Receiver is positioned so that you can point your remote at the LED on its front.
*Locate the IR receiver on the source device, the one the Video Sender is connected to with RCA cables. The easiest way to do this is to cover part of the case with your hand and push buttons on the remote. Move your hand around; when the remote does not work, then you know your hand is over the IR receiver.
+
#Locate the IR receiver on the source device, the one the Video Sender is connected to with RCA cables. The easiest way to do this is to cover part of the case with your hand and push buttons on the remote. Move your hand around; when the remote does not work, then you know your hand is over the IR receiver.
*Connect the IR extender cable to the Sender and to the IR receiver spot.  
+
#Connect the IR extender cable to the Sender and to the IR receiver spot.  
  
 
[[category:Configuration]]
 
[[category:Configuration]]

Revision as of 23:32, 31 January 2007

Questions

How do I set up the remote control extender on my Video Sender?

Answer

  1. Make sure the Video Receiver is positioned so that you can point your remote at the LED on its front.
  2. Locate the IR receiver on the source device, the one the Video Sender is connected to with RCA cables. The easiest way to do this is to cover part of the case with your hand and push buttons on the remote. Move your hand around; when the remote does not work, then you know your hand is over the IR receiver.
  3. Connect the IR extender cable to the Sender and to the IR receiver spot.