Setting Up the 5-in-1 Universal Learning Remote

From X10Wiki
Revision as of 01:34, 21 May 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


How do I set up the 5-in-1 Universal Learning Remote?


  • Turn on the device you want to control (Television, VCR, cable box, satellite receiver, etc.).
  • Press and hold SETUP on the remote until the LED indicator at the top lights steadily. Release the SETUP button.
  • Press and release the mode button for the device you want to control. The LED light blinks once.
  • Enter the 3 digit Code from the Library Code Table. The LED turns off after the last digit entered.
  • Point the remote at the device and press the POWER button. Your device should turn off.
  • Turn your device on and press CHANNEL+. If it responds, the setup is complete.

Related Articles

Universal Remote Code List

Setting Up Video Sender with Tivo

Setting Up the Infrared Remote Sender (PowerMID)

Setting Up the Platinum Universal Remote

Setting Up Video Sender L2

Setting Up Video Sender L2 with your Computer