Setting Up the Platinum Universal Remote

From X10Wiki
Revision as of 01:37, 21 May 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


How do I program my Platinum Universal Remote?


  • Turn on the device you want to control (Television, VCR, cable box, satellite receiver, etc.).
  • Press and hold SETUP on the remote until the LED indicator at the top lights steadily. Release the SETUP button.
  • Press and release the mode button for the device you want to control. The LED light blinks once.
  • Enter the 3-digit Code from the Library Code Table. The LED turns off after the last digit entered.
  • Point the remote at the device and press the POWER button. Your device should turn off.
  • Turn your device on and press CHANNEL+. If it responds, the setup is complete.

Related Articles

Universal Remote Code List

Setting Up Video Sender with Tivo

Setting Up the Infrared Remote Sender (PowerMID)

Setting Up the 5-in-1 Universal Learning Remote

Setting Up Video Sender L2

Setting Up Video Sender L2 with your Computer