Setting up Favorites
How do I set up Favorites on the IconRemote?
Press the HOME key, select Setup, and then select Favorites. Next, select Add/Edit and pick a group to add favorites to. You can now press a Side Key next to an existing logo (to edit/change it), or press a Side Key next to a blank location to add a new favorite, or press More to add or edit icons on a new page. Once you have selected a location, press any digit key, say digit 4, to enter a channel number. You can enter more digits if desired. The channel number can include a dash (-) for digital channels, e.g., 2-3, or can include ENTER, or OK, if your device requires it to change channels, e.g. 472Ok, or 550Ent.
Now, press the Side Key next to Pick Logo. You are shown a screen of popular channel logos. You can select Next (Side Key 10) or Back (Side Key 5) to see more logos.
Make sure you have selected the device that you want each favorite to control, e.g. TV, Cable, or Sat. You can use Pick Device to change the type of device.
If you want to add a label to the logo press the Side Key next to Label. This is optional so if you don’t want to add a label to the logo you can just select Save to save the setting for this favorite. If you save this favorite, Set Favorite 2 of 10 is now shown at the bottom of the screen to indicate that you can add another favorite channel. Again just press a channel number key on the remote, choose a logo and change the Device Type (if you want to). Add a few more favorites (up to 10). You can add more later, or delete or edit them later, or even reorder their positions. Select Done when you’re finished setting up favorites.
If you select Label, you see the screen to the right with a small label on top of the logo. Initially the label will be the channel number for that logo. If you Save this, the logo will have a small label representing the channel number for that logo in its bottom right hand corner, see screen (5).
You can type in a new label if you want one. You enter the new name for the key using the numeric keys on the remote, in a similar fashion to typing in text on a cell phone.
For example, to type KING, press the 5 key twice to enter the letter K. Then wait a second and press the 4 key repeatedly until the letter I is displayed. Then wait a second and press 6 to select N. Finally, wait a second and pressed the 4 key to select G.
Note: “Triple tap” name entry works in a similar fashion to text entry on a cell phone. Tap each numeric key to cycle through ALL caps, numbers, and lower case letters. E.G., repeatedly pressing the number 2 key cycles through A, B, C, 2, a, b, c. Pressing the 9 key cycles through W, X, Y, Z, 9, w, x, y, z. A “space” can be selected with the 0 (zero) key. The number 1 key selects 1 . @ ? ! - & and : You can backspace an entry with the key to the left of the 0 (zero) key. Press OK (or the Enter “E” key) to confirm your new name.