Difference between revisions of "Smart Power Line Command (PLC) Repeater Operating Instructions"

From X10Wiki
Jump to: navigation, search
(Created page with "'''Installation:''' 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet. '''Te...")
 
Line 5: Line 5:
  
 
'''Testing The Repeater:'''
 
'''Testing The Repeater:'''
1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.
+
1. Plug the PLC Repeater into an AC outlet.
2. Plug the PLC Repeater into an AC outlet
+
2. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.

Revision as of 18:09, 23 August 2016

Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater: 1. Plug the PLC Repeater into an AC outlet. 2. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.