Difference between revisions of "Smart Power Line Command (PLC) Repeater Operating Instructions"

From X10Wiki
Jump to: navigation, search
Line 1: Line 1:
 
'''Installation:'''
 
'''Installation:'''
 
1. Find a suitable location, preferably centrally located between the transmitting and receiving units.
 
1. Find a suitable location, preferably centrally located between the transmitting and receiving units.
 +
 
2. Plug the PLC Repeater into an AC outlet.
 
2. Plug the PLC Repeater into an AC outlet.
  
  
 
'''Testing The Repeater:'''
 
'''Testing The Repeater:'''
1. Plug the PLC Repeater into an AC outlet.
+
1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.
2. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.
+

Revision as of 18:10, 23 August 2016

Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units.

2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater: 1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.