Difference between revisions of "Smart Power Line Command (PLC) Repeater Operating Instructions"

From X10Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 
'''Installation:'''
 
'''Installation:'''
 +
 
1. Find a suitable location, preferably centrally located between the transmitting and receiving units.
 
1. Find a suitable location, preferably centrally located between the transmitting and receiving units.
  
Line 6: Line 7:
  
 
'''Testing The Repeater:'''
 
'''Testing The Repeater:'''
 +
 
1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.
 
1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.

Latest revision as of 18:10, 23 August 2016

Installation:

1. Find a suitable location, preferably centrally located between the transmitting and receiving units.

2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater:

1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.