Smart Power Line Command (PLC) Repeater Operating Instructions

From X10Wiki
Revision as of 18:09, 23 August 2016 by X10douglas (Talk | contribs)

Jump to: navigation, search

Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater: 1. Plug the PLC Repeater into an AC outlet. 2. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.