Smart Power Line Command (PLC) Repeater Operating Instructions
Revision as of 18:09, 23 August 2016 by X10douglas (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet.
Testing The Repeater:
1. Plug the PLC Repeater into an AC outlet.
2. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.