Smart Power Line Command (PLC) Repeater Operating Instructions

From X10Wiki
Revision as of 18:10, 23 August 2016 by X10douglas (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Installation:

1. Find a suitable location, preferably centrally located between the transmitting and receiving units.

2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater:

1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.