Temporarily Disabling the Mini-Timer

From X10Wiki
Revision as of 21:45, 8 February 2007 by Ericb (talk | contribs) (→‎Answer)
Jump to navigation Jump to search


How can I temporarily disable the Mini-Timer without deleting the stored events?


There are two ways to do that:

You can put the Mini-Timer in "SET CLOCK" mode (on the four-position slide switch.) In that mode, the clock will run normally, but no timed commands will be issued for position 1 or 5. Other timers will run normally.

To disable all the timers, simply change the House Code dial on the Mini-Timer to an unused House Code. The commands will still go out, but nothing will be set to receive them. Change the House Code back to start the timers up again.