Troubleshooting PowerMid Remote Extender Interference

From X10Wiki
Revision as of 01:30, 21 May 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


The light on my Powermid transmitter stays on all the time and my remote doesn't work. What should I do?


The PowerMid transmitter light should only be on when you are sending commands from your remote. If the light stays on constantly, your Powermid may be receiving Radio Frequency (RF) interference from a nearby device. This typically happens when the unit is placed directly on top of a television set.

To solve the problem, try moving the Powermid transmitter away from any possible source of Radio Frequency interference. You may only need to move it a few inches to resolve this issue. When it is operating correctly, the LED on the transmitter is dark unless it receives a signal from your remote.

Related Articles

Setting Up Video Sender with Tivo

Setting Up the Platinum Universal Remote

Setting Up the 5-in-1 Universal Learning Remote

Setting Up Video Sender L2

Setting Up Video Sender L2 with your Computer