Troubleshooting Remote Controls in ActiveHome Pro

From X10Wiki
Revision as of 21:13, 4 November 2015 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

I can control modules from the ActiveHome Pro screen, but not using my remote controls. What should I do?

Answer

ActiveHome Pro must be set up to take commands from your remote control(s). In the main ActiveHome Pro screen, click on the Tools menu, and then choose Hardware Configuration. On the bottom-right hand side you will see Transceived House Code(s). Select Specific, and choose each one you use. When they are all chosen, click Update Interface to save your House Codes within the interface. You should now be able to operate your modules using an X10 remote control.

Hwconfig.jpg

Related Articles

Improving Remote Control Range