Difference between revisions of "Using Your Vanguard With a Remote Control"

From X10Wiki
Jump to navigation Jump to search
(Perl Automatic Add)
Line 1: Line 1:
Questions
+
== Questions ==
 +
 
 
I cannot pan, tilt, or zoom my Vanguard camera.  Why won't the remote control it?
 
I cannot pan, tilt, or zoom my Vanguard camera.  Why won't the remote control it?
Answer
+
 
 +
== Answer ==
 +
 
 
If you are unable to pan, tilt, or zoom your Vanguard camera, then the remote and camera are either not initialized with one another, or the camera is set on Program.
 
If you are unable to pan, tilt, or zoom your Vanguard camera, then the remote and camera are either not initialized with one another, or the camera is set on Program.
 +
 
To check this, first flip the Vanguard camera upside down.  Then check the switch that is labeled "Program, Transmit Enable, Transmit Disable."  If it is currently set to Program, then it will not receive commands to rotate.  Leave it on Program and press the C1 button on the remote.  Then change the switch back to Transmit Enable for wireless operation, or Transmit Disable of you are using the wired connection.  If it is not currently on Program, slide the switch to it and repeat the procedure above.
 
To check this, first flip the Vanguard camera upside down.  Then check the switch that is labeled "Program, Transmit Enable, Transmit Disable."  If it is currently set to Program, then it will not receive commands to rotate.  Leave it on Program and press the C1 button on the remote.  Then change the switch back to Transmit Enable for wireless operation, or Transmit Disable of you are using the wired connection.  If it is not currently on Program, slide the switch to it and repeat the procedure above.
Related Articles
+
 
[img src="http://site.x10.com/?Z3gxT2tiYXNlYXJ0aWNsZTEuZGF0=RND|kbasearticle"]
+
[[category: Hardware]]
 +
[[category: Vanguard]]

Revision as of 00:22, 21 March 2006

Questions

I cannot pan, tilt, or zoom my Vanguard camera. Why won't the remote control it?

Answer

If you are unable to pan, tilt, or zoom your Vanguard camera, then the remote and camera are either not initialized with one another, or the camera is set on Program.

To check this, first flip the Vanguard camera upside down. Then check the switch that is labeled "Program, Transmit Enable, Transmit Disable." If it is currently set to Program, then it will not receive commands to rotate. Leave it on Program and press the C1 button on the remote. Then change the switch back to Transmit Enable for wireless operation, or Transmit Disable of you are using the wired connection. If it is not currently on Program, slide the switch to it and repeat the procedure above.