Difference between revisions of "Using your Power over Ethernet (PoE) Adapter"

From X10Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
;PoE Adapters: Model POEPASS-01, POEPASS-03
+
*You can purchase them [http://www.amazon.com/AIR802-POEPASS-01-Injector-Splitter-Connector/dp/B003DLJNWE here].
  
 
==Question==
 
==Question==
Line 7: Line 7:
 
==Answer==
 
==Answer==
  
Make sure your Ethernet cable is 100 feet or shorter. Plug the power supply into wall power near your router or switch. Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.) Plug that PoE adapter into a LAN port on your router. Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera. Connect the other end of the Ethernet cable to the "splitter" adapter.
+
*Make sure your Ethernet cable is 100 feet or shorter.
 +
 
 +
*Plug the power supply into wall power near your router or switch.
 +
 
 +
*Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.)
 +
 
 +
*Plug that PoE adapter into a LAN port on your router.
 +
 
 +
*Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera.
 +
 
 +
*Connect the other end of the Ethernet cable to the "splitter" adapter.
  
  
 
[[Image:POE_breakout.jpg]]
 
[[Image:POE_breakout.jpg]]
 +
 +
[[category: Configuration]]
 +
[[category: Frequently asked questions]]
 +
[[category: Hardware]]
 +
[[category: Product Information]]
 +
[[category: Software]]

Latest revision as of 03:00, 19 May 2014

  • You can purchase them here.

Question

How do I set up my AirSight camera with my X10 Power over Ethernet (PoE) adapter?

Answer

  • Make sure your Ethernet cable is 100 feet or shorter.
  • Plug the power supply into wall power near your router or switch.
  • Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.)
  • Plug that PoE adapter into a LAN port on your router.
  • Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera.
  • Connect the other end of the Ethernet cable to the "splitter" adapter.


POE breakout.jpg