Difference between revisions of "Using your Power over Ethernet (PoE) Adapter"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 1: | Line 1: | ||
;PoE Adapters: Model POEPASS-01, POEPASS-03 | ;PoE Adapters: Model POEPASS-01, POEPASS-03 | ||
| + | |||
==Question== | ==Question== | ||
| Line 7: | Line 8: | ||
==Answer== | ==Answer== | ||
| − | Make sure your Ethernet cable is 100 feet or shorter. Plug the power supply into wall power near your router or switch. Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.) Plug that PoE adapter into a LAN port on your router. Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera. Connect the other end of the Ethernet cable to the "splitter" adapter. | + | *Make sure your Ethernet cable is 100 feet or shorter. |
| + | |||
| + | *Plug the power supply into wall power near your router or switch. | ||
| + | |||
| + | *Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.) | ||
| + | |||
| + | *Plug that PoE adapter into a LAN port on your router. | ||
| + | |||
| + | *Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera. | ||
| + | |||
| + | *Connect the other end of the Ethernet cable to the "splitter" adapter. | ||
[[Image:POE_breakout.jpg]] | [[Image:POE_breakout.jpg]] | ||
| + | |||
| + | [[category: Configuration]] | ||
| + | [[category: Frequently asked questions]] | ||
| + | [[category: Hardware]] | ||
| + | [[category: Product Information]] | ||
| + | [[category: Software]] | ||
Revision as of 22:00, 15 April 2014
- PoE Adapters
- Model POEPASS-01, POEPASS-03
Question
How do I set up my AirSight camera with my X10 Power over Ethernet (PoE) adapter?
Answer
- Make sure your Ethernet cable is 100 feet or shorter.
- Plug the power supply into wall power near your router or switch.
- Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.)
- Plug that PoE adapter into a LAN port on your router.
- Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera.
- Connect the other end of the Ethernet cable to the "splitter" adapter.
