Using your Power over Ethernet (PoE) Adapter

From X10Wiki
Revision as of 20:16, 25 October 2012 by Mt656 (Talk | contribs)

Jump to: navigation, search
PoE Adapters
Model POEPASS-01, POEPASS-03

Question

How do I set up my AirSight camera with my X10 Power over Ethernet (PoE) adapter?

Answer

Make sure your Ethernet cable is 100 feet or shorter. Plug the power supply into wall power near your router or switch. Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.) Plug that PoE adapter into a LAN port on your router. Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera. Connect the other end of the Ethernet cable to the "splitter" adapter.

POE_breakout.jpg