Vanguard Zoom Camera Setup

From X10Wiki
Revision as of 01:26, 21 May 2014 by X10douglas (Talk | contribs)

Jump to: navigation, search

Introduction

This guide should help you get started quickly with the X10 Vanguard Zoom Camera

Setup

van_1.jpg

Unpack these items.

van_2.jpg

Connect the camera to its power supply and plug it into a wall outlet.

van_3.jpg

Put 4 AAA batteries (not included) into the remote control.

3_receiver_power.jpg

Connect the wireless video receiver to power and plug it into a wall outlet.

4_receiver_videoin.jpg

Connect the video receiver to your TV.

5_receiver_on.jpg

Turn the video receiver on and flip up the antenna. Point the antenna toward the camera.

6_video_select.jpg

Select your TV's video input (or try channel 0 and then Channel Down). The camera's image should appear.

Related Articles

Problems Opening Remote Viewer

Troubleshooting Picture Quality on PC

Camera Video Display Problems on TV

Troubleshooting Picture Quality on TV

Remote Control Doesn't Control Vanguard Camera

Vanguard Camera Won't Focus

Remove Camera Text from Video Display