| || |
catalog/ cat_automation. htm Purchase] |+|
| || |
Revision as of 00:35, 2 May 2014
Model: WS467, WS4777, WS12A, WS13A
I bought an X10 dimming wall switch in 2007 or later and its manual does not seem to describe its behavior correctly. Do you have updated instructions?
I have a light that I would like to control from two different switches, but right now it only has one switch. Can X10 help me without rewiring?
Why can’t I use the X10 WS467 Wall Switch Module to control a fluorescent light?
I've noticed that my wall switch module feels quite warm to the touch. Is this normal, and is it safe?
If I mount multiple dimmer switches right next to each other, does that reduce the maximum load they can safely handle?
Why do some modules work in some outlets and not in others?
Why do some modules sometimes turn on and off by themselves?
My wall switches are installed and appear to be working properly, but they emit an audible hum. Why does this happen? Is this normal?
Why does my Wall Switch Module turn on but not off?
Why does my Wall Switch Module turn off but not on?
Why can't I use an X10 Wall Switch Module to control a fluorescent light?
Since there are 256 possible addresses, am I limited to 256 controlled devices?
My WS13A and a WS14A are setup for a 3-way application with fluorescent lights. My WS14a will only turn the light off. Why?
My WS12A and a WS14A are setup for a 3-way application with incandescent lights. My WS14A does not control the light properly. Why?
What is the wattage capability for X10 wall switches?
Where are the House and Unit Code dials on my Decorator-style wall switch?
I bought a WS467 wall switch in 2007 or later and its manual does not seem to describe its behavior correctly. Do you have updated instructions?
I have one switch that controls a ceiling fan with lights (CFL) and also an outdoor bug lamp (not sure what bulb is used but I would imagine another cfl) How do I accomplish this, with what switch and do I just splice the wires all together? Do I need a traveler wire? Thank you