XCam Anywhere Power Supply

From X10Wiki
Revision as of 21:42, 28 June 2006 by Ericb (Talk | contribs)

Jump to: navigation, search

Question

What power supply does the SC15A or SC16A require?

Answer

Both the SC15A and SC16A cameras take the D9100 (AKA PT31A) power supply. This supply plugs into a regular 110V/120V AC outlet and draws five watts. It outputs 9 volts of DC power at 100mA. It is an unregulated power supply, so it will only put out 9V DC with a 100mA load. The power supply has the positive contacts on the inside, and the negative on the outside--it is "tip-positive." The exterior diameter is 4.75mm; the interior is 1.7mm.

If you need a new power supply and do not have time to wait for one in the mail, call your local Radio Shack. Ask if they have parts 273-1767 and 273-1706 in stock; together, these should cost $15.99. You will get a 9 volt regulated power supply and the appropriate adapter to connect it to your camera.

Adaptaplugc.jpg Pluginsc16a.jpg

9 volt adapter

Adaptaplug: C