View source for Setting Up Video Sender with a VCR

==Introduction==

This guide should help you in quickly setting up the X10 Video Sender with a VCR.

==Setup==

Unpack these items. Disconnect your VCR from your TV.

[[Image:vidsend_1_parts.gif]]

Connect the wireless video receiver to power and plug it into a wall outlet.

[[Image:vidsend_2_rx_power.gif]]

Connect the video receiver to your second TV, the one where you want to view your VCR playback.

[[Image:vidsend_3_rx_rca.gif]]

Connect the video transmitter to the output on your VCR, plug it into power, and turn it on.

[[Image:vidsend_4_tx_vcr.gif]]

Select your TV's video input just like you would for VCR. Your VCR screen should appear.

[[Image:vidsend_5_video_select.jpg]]



===Alternate Receiver Setup: Coaxial Connection===

If your TV does not have RCA audio/video inputs, or if they are already in use, you can connect the Video Receiver to your TV using the coaxial connection. Instead of following Step 3 (above), do the following:
*Find the included coaxial cable.
*Connect one end of the coaxial cable to the coaxial input on your TV. It might be labeled "coax," "cable," or even "antenna."
*Connect the other end of the coaxial cable to the output on the Video Receiver.
*Plug the Video Receiver into power, and make sure the power switch on its left side is turned on.
*Use the TV CHANNEL switch on the bottom of the Video Receiver to select the channel on which to display video from the Video Receiver--Channel 3 or Channel 4.


To view the Video Sender transmission, change the channel on your TV to the one selected above.



==Related Articles==

[[Setting Up Video Sender with Tivo]]

[[Setting Up Video Sender with a DVR]]

[[Setting Up Video Sender with a DVD Player]]

[[Setting Up Video with a Cable Box]]

[[Setting Up Video Sender with a Game Console]]

[[Setting Up Video Sender with a Satellite Receiver]]

[[Category:frequently asked questions]]