Difference between revisions of "Comparison of All Motion Sensors"

Latest revision as of 22:07, 12 May 2014

All HawkEye (MS12A), HawkEye II (MS13A), EagleEye (MS14A), and ActiveEye (MS16A) Motion Sensors share the following characteristics:

Note: At a minimum, a Transceiver (TM751 or RR501) is required to test them.

The following chart compares the differences between the Motion Sensors:

@@ Line 1: / Line 1: @@
-== EDITME ==
+==Introduction==
-[[category: needed pages]]
+All '''HawkEye''' [[MS13A|(MS12A)]], '''HawkEye II''' [[MS13A|(MS13A)]], '''EagleEye''' [[MS14A|(MS14A)]], and '''ActiveEye''' [[MS16A|(MS16A)]] Motion Sensors share the following characteristics:
+*Passive Infrared (PIR) Detection
+*Detect motion approximately 20 feet distant
+*100 foot transmission range (maximum)
+*Configurable to all House and Unit codes
+<b>Note:</b>  At a minimum, a Transceiver (TM751 or RR501) is required to test them.
+'''The following chart compares the differences between the Motion Sensors:'''
+{| border="1" width="85%"
+| '''X10 Part''' || '''PRO Part''' || '''Detection''' || '''Dawn/Dusk Detection''' || '''No Motion Off Time''' || '''Weather Resistant'''
+|-
+| '''[[MS13A|MS12A]]''' || N/A || Always || Fixed Enabled || Fixed 6 Minutes || No
+|-
+| '''[[MS13A]]''' || PMS02 || Always or Night Only || Fixed Enabled || Variable || No
+|-
+| '''[[MS14A]]''' || PMS03 || Always or Night Only || Fixed Enabled || Variable || Yes
+|-
+| '''[[MS16A]]''' || PMS04 || Always or Night Only || Variable || Variable || Yes
+|}
+== Setup ==
+*[[MS12A HawkEye Motion Sensor Setup]]
+*[[MS13A HawkEye II Motion Sensor Setup]]
+*[[MS14A Eagle Eye Motion Sensor Setup]]
+*[[MS16A Active Eye Motion Sensor Setup]]
+===Related Articles===
+[[Motion Sensors]]
+[[Motion Sensors with a Camera System]]
+[[Category:hardware]]
+[[Category:frequently asked questions]]