Difference between revisions of "Differences Between the TM751 and RR501"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 11: | Line 11: | ||
*The '''RR501''' has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The '''TM751''' is hardwired to Unit Code 1 and cannot be changed. | *The '''RR501''' has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The '''TM751''' is hardwired to Unit Code 1 and cannot be changed. | ||
| − | The '''RR501''' does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple '''TM751'''s. Unplug and replug each '''TM751''' to fix lockups. | + | *The '''RR501''' does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple '''TM751'''s. Unplug and replug each '''TM751''' to fix lockups. |
Revision as of 23:15, 12 May 2014
Question
What is the difference between the RR501 and the TM751?
Answer
- BOTH Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline.
- The RR501 will respond to powerline commands. The TM751 will not.
- The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed.
- The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s. Unplug and replug each TM751 to fix lockups.