Difference between revisions of "Lola Screen Not Displayed on TV"
Jump to navigation
Jump to search
(→Answer) |
X10douglas (talk | contribs) |
||
| (4 intermediate revisions by one other user not shown) | |||
| Line 10: | Line 10: | ||
*Select the appropriate video input on your TV. Usually you can select the input mode by pressing the VIDEO or INPUT button on the remote control. You might also have to change the TV to Channel 0 or 2, and then use Channel Down to change video inputs. See your TV's owner's manual if you are not sure how to change the video input source. | *Select the appropriate video input on your TV. Usually you can select the input mode by pressing the VIDEO or INPUT button on the remote control. You might also have to change the TV to Channel 0 or 2, and then use Channel Down to change video inputs. See your TV's owner's manual if you are not sure how to change the video input source. | ||
*Make sure your Lola transmitter is connected to power and turned On (the On/Off switch is located on the left side). | *Make sure your Lola transmitter is connected to power and turned On (the On/Off switch is located on the left side). | ||
| + | *Check that your video card's video output is turned on. Open the Windows Control Panel, go to the Display control panel, go to the Settings tab, and look for the output settings--usually under "Advanced." See your video card support for more help. | ||
*Follow the setup instructions again, and check all connections. | *Follow the setup instructions again, and check all connections. | ||
*Make sure that the ABCD switches on the bottom of the transmitter and on the bottom of the wireless video receiver are both set to the same letter. | *Make sure that the ABCD switches on the bottom of the transmitter and on the bottom of the wireless video receiver are both set to the same letter. | ||
| Line 18: | Line 19: | ||
*Check that your video card's video output is turned on. Open the Windows Control Panel, go to the Settings tab, and look for the output settings--usually under "Advanced." See your video card support for more help. | *Check that your video card's video output is turned on. Open the Windows Control Panel, go to the Settings tab, and look for the output settings--usually under "Advanced." See your video card support for more help. | ||
*Follow the setup instructions again, and check all connections. | *Follow the setup instructions again, and check all connections. | ||
| + | |||
| + | =====Video Card Help===== | ||
| + | |||
| + | [http://download.nvidia.com/Windows/91.31/91.31_ForceWare_New_Control_Panel_Quick_Start.pdf Nvidia Setup Manual] | ||
| + | |||
| + | [http://ati.amd.com/products/catalyst/HDTV_Setup_Guide.pdf ATI Setup Manual] | ||
===Related Articles=== | ===Related Articles=== | ||
[[No Music Listed]] | [[No Music Listed]] | ||
| − | |||
| − | |||
[[Category: troubleshooting]] | [[Category: troubleshooting]] | ||
Latest revision as of 01:27, 16 May 2014
Question
I can't get Lola to show up on my TV, what do I do?
Answer
If you have a Lola wireless kit, follow these steps:
- Make sure your Wireless Video Receiver is connected to its power cord and turned On (the On/Off switch is located on the left side).
- Select the appropriate video input on your TV. Usually you can select the input mode by pressing the VIDEO or INPUT button on the remote control. You might also have to change the TV to Channel 0 or 2, and then use Channel Down to change video inputs. See your TV's owner's manual if you are not sure how to change the video input source.
- Make sure your Lola transmitter is connected to power and turned On (the On/Off switch is located on the left side).
- Check that your video card's video output is turned on. Open the Windows Control Panel, go to the Display control panel, go to the Settings tab, and look for the output settings--usually under "Advanced." See your video card support for more help.
- Follow the setup instructions again, and check all connections.
- Make sure that the ABCD switches on the bottom of the transmitter and on the bottom of the wireless video receiver are both set to the same letter.
If you are using the Lola Direct Connect Kit, follow these steps:
- Select the appropriate video input on your TV. Usually you can select the input mode by pressing the VIDEO or INPUT button on the remote control. You might also have to change the TV to Channel 0 or 2, and then use Channel Down to change video inputs. See your TV's owner's manual if you are not sure how to change the video input source.
- Check that your video card's video output is turned on. Open the Windows Control Panel, go to the Settings tab, and look for the output settings--usually under "Advanced." See your video card support for more help.
- Follow the setup instructions again, and check all connections.