Difference between revisions of "Alarm Input Armed / IO Linkage on Alarm"
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 63: | Line 63: | ||
[[Image:IOLINKAGE12.png]] | [[Image:IOLINKAGE12.png]] | ||
| + | |||
| + | |||
| + | ==IO Pins for IO Alarm Linkage== | ||
| + | |||
| + | [[Image:ALARMINPUT4.png]] | ||
| + | |||
| + | ===I/O PINS:=== | ||
| + | |||
| + | # '''Output''' | ||
| + | # '''Output''' | ||
| + | # '''Alarm Input''' | ||
| + | # '''Input (GND)''' | ||
| + | |||
| + | |||
| + | '''Output pins:''' Output pins (1 & 2) can be used to enable IO linkage on alarm. | ||
| + | |||
| + | * For example, you might connect an external siren to sound when motion is detected. | ||
| + | |||
| + | * You can also manually control the output switches via the WebUI buttons [[Image:ALARMINPUT5.png]] & [[Image:ALARMINPUT6.png]] to turn the connected device ON/OFF. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | '''Input pins:''' Input pins (3 & 4) can be used for 1-way external sensor input to the camera. | ||
| + | |||
| + | * For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above). | ||
| + | |||
| + | * If you link an external alarm device to Pins 3 and 4, when '''Alarm Input Enable''' is selected, the external alarm is armed. | ||
| + | |||
| + | |||
| + | |||
| + | '''NOTE:''' All pins work as a switch only. | ||
[[category: Configuration]] | [[category: Configuration]] | ||
Latest revision as of 22:09, 9 February 2015
Question
How do I setup my Airsight Cameras to use Alarm Input Armed / IO Linkage on Alarm?
Answer
Alarm Settings for Internet Explorer
If you want to connect external alarm devices:
- For alarm INPUT device, choose Alarm Input Armed to enable it
- For alarm OUTPUT device, choose IO Linkage on Alarm to enable it.
External Alarm: Set external alarm function ON/OFF.
Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.
Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.
Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).
Action with Alarm: These are actions optional for external alarm triggered.
Alarm Settings for Safari, Chrome, Firefox
Click Alarm to enter the interface:
External Alarm: Set external alarm function ON/OFF.
Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.
Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.
Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).
Action with Alarm: These are actions optional for external alarm triggered.
IO Pins for IO Alarm Linkage
I/O PINS:
- Output
- Output
- Alarm Input
- Input (GND)
Output pins: Output pins (1 & 2) can be used to enable IO linkage on alarm.
- For example, you might connect an external siren to sound when motion is detected.
- You can also manually control the output switches via the WebUI buttons
& 
to turn the connected device ON/OFF.
Input pins: Input pins (3 & 4) can be used for 1-way external sensor input to the camera.
- For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above).
- If you link an external alarm device to Pins 3 and 4, when Alarm Input Enable is selected, the external alarm is armed.
NOTE: All pins work as a switch only.