Difference between revisions of "Smart Power Line Command (PLC) Repeater Operating Instructions"
Jump to navigation
Jump to search
X10douglas (talk | contribs) (Created page with "'''Installation:''' 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet. '''Te...") |
(No difference)
|
Revision as of 01:35, 9 December 2015
Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet.
Testing The Repeater:
1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.
2. Plug the PLC Repeater into an AC outlet