Difference between revisions of "Smart Power Line Command (PLC) Repeater Operating Instructions"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 1: | Line 1: | ||
'''Installation:''' | '''Installation:''' | ||
1. Find a suitable location, preferably centrally located between the transmitting and receiving units. | 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. | ||
| + | |||
2. Plug the PLC Repeater into an AC outlet. | 2. Plug the PLC Repeater into an AC outlet. | ||
'''Testing The Repeater:''' | '''Testing The Repeater:''' | ||
| − | 1 | + | 1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command. |
| − | |||
Revision as of 18:10, 23 August 2016
Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units.
2. Plug the PLC Repeater into an AC outlet.
Testing The Repeater:
1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.