Difference between revisions of "Mini-timer Flashes "18:88""
(Perl Automatic Add) |
|||
| Line 1: | Line 1: | ||
| − | Questions | + | ==Questions== |
| − | Why does my MT10A Mini Timer flash "18:88"? | + | |
| − | + | '''Why does my MT10A Mini Timer flash "18:88"?''' | |
| + | |||
The Mini Timer can manually control 8 modules and can be programmed to automatically control 4 modules. You can set 2 ON times and 2 OFF times for each of these 4 modules. If you try to program more than 2 on or off times for a module, the display will flash "18:88" to let you know you have exceeded the limit. To clear this, set the slide switch to REVIEW, press the number button that you pressed when the display changed to 18:88; then press CLEAR. You can also unplug the Mini Timer and take the battery out; then plug it back in and reset the time and your programmed events. | The Mini Timer can manually control 8 modules and can be programmed to automatically control 4 modules. You can set 2 ON times and 2 OFF times for each of these 4 modules. If you try to program more than 2 on or off times for a module, the display will flash "18:88" to let you know you have exceeded the limit. To clear this, set the slide switch to REVIEW, press the number button that you pressed when the display changed to 18:88; then press CLEAR. You can also unplug the Mini Timer and take the battery out; then plug it back in and reset the time and your programmed events. | ||
| + | |||
Note: you can only program times for units 1-4 OR 5-8 (not both). If you set times for units 1-4, then move the slide switch to position 5-8, the times you set for units 1-4 will affect modules set to 5-8 instead. If you try to program more times for units 5-8, the display will show 18:88 as described above, indicating that you have exceeded the 2 on/off times allowed per unit. | Note: you can only program times for units 1-4 OR 5-8 (not both). If you set times for units 1-4, then move the slide switch to position 5-8, the times you set for units 1-4 will affect modules set to 5-8 instead. If you try to program more times for units 5-8, the display will show 18:88 as described above, indicating that you have exceeded the 2 on/off times allowed per unit. | ||
| − | Related Articles | + | |
| − | [ | + | ===Related Articles=== |
| + | |||
| + | [[Category:troubleshooting]] | ||
Revision as of 18:29, 17 March 2006
Questions
Why does my MT10A Mini Timer flash "18:88"?
The Mini Timer can manually control 8 modules and can be programmed to automatically control 4 modules. You can set 2 ON times and 2 OFF times for each of these 4 modules. If you try to program more than 2 on or off times for a module, the display will flash "18:88" to let you know you have exceeded the limit. To clear this, set the slide switch to REVIEW, press the number button that you pressed when the display changed to 18:88; then press CLEAR. You can also unplug the Mini Timer and take the battery out; then plug it back in and reset the time and your programmed events.
Note: you can only program times for units 1-4 OR 5-8 (not both). If you set times for units 1-4, then move the slide switch to position 5-8, the times you set for units 1-4 will affect modules set to 5-8 instead. If you try to program more times for units 5-8, the display will show 18:88 as described above, indicating that you have exceeded the 2 on/off times allowed per unit.