Difference between revisions of "Ninja Presets With Remote"
(→Answer) |
|||
| Line 21: | Line 21: | ||
Move the switch at the bottom to Program. Press Center then move the | Move the switch at the bottom to Program. Press Center then move the | ||
switch back to Normal. | switch back to Normal. | ||
| − | ===WITH THE SWITCH SET TO NORMAL:=== | + | ====WITH THE SWITCH SET TO NORMAL:==== |
Press P1, P2, P3 or P4 to move to any of the 4 positions stored for the | Press P1, P2, P3 or P4 to move to any of the 4 positions stored for the | ||
camera. | camera. | ||
Revision as of 20:26, 18 September 2006
Questions
How do I store preset positions with my remote?
Answer
Buttons P1 thru P4 are used to store 4 position settings for the camera.
- To store the first position for the camera, press the BLUE buttons to
scan to the position you want. Move the switch at the bottom from Normal to Program. Press P1.
- To store the second position for the camera, press the BLUE buttons to
scan to the position you want. Move the switch at the bottom from Normal to Program. Press P2.
- To store the third position for the camera, press the BLUE buttons to
scan to the position you want. Move the switch at the bottom from Normal to Program. Press P3.
- To store the fourth position for the camera, press the BLUE buttons to
scan to the position you want. Move the switch at the bottom from Normal to Program. Press P4. Move the switch back to Normal.
To clear all stored positions:
Move the switch at the bottom to Program. Press Center then move the switch back to Normal.
WITH THE SWITCH SET TO NORMAL:
Press P1, P2, P3 or P4 to move to any of the 4 positions stored for the camera. Press Center to center the position for the camera. Press Sweep to sweep through all 4 positions stored for the camera. To stop scanning or movement to a stored position: Press any BLUE key on the remote while the camera is moving to stop the movement.