Difference between revisions of "Setting ActiveEye For Night Only"
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn: | To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn: | ||
| − | Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows: | + | Press the Unit/Off button once. |
| + | |||
| + | The red light flashes. | ||
| + | |||
| + | Then, (within 3 seconds) press and hold the House/On button. | ||
| + | |||
| + | The green light turns on. | ||
| + | |||
| + | 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows: | ||
*The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn. | *The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn. | ||
| Line 14: | Line 22: | ||
*The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn. | *The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn. | ||
| − | |||
| − | Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks. | + | |
| + | To change this, Press the Unit/Off button once. | ||
| + | |||
| + | The red light flashes. | ||
| + | |||
| + | Then, (within 3 seconds) press and hold the House/On button. | ||
| + | |||
| + | The green light turns on. | ||
| + | |||
| + | 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. | ||
| + | |||
| + | Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above. | ||
| + | |||
| + | Hold the button for 3 seconds on your last press. | ||
| + | |||
| + | The red light then reports the setting with 1, 2, 3, or 4 blinks. | ||
| + | |||
| + | |||
| + | ==Related Articles== | ||
| + | |||
| + | [[Setting EagleEye For Night Only]] | ||
Latest revision as of 19:34, 29 May 2014
Question
How do I set the ActiveEye to only work at night?
Answer
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:
Press the Unit/Off button once.
The red light flashes.
Then, (within 3 seconds) press and hold the House/On button.
The green light turns on.
3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:
- The red light blinks once if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
- The red light blinks twice if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn.
- The red light blinks three times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn.
- The red light blinks four times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.
To change this, Press the Unit/Off button once.
The red light flashes.
Then, (within 3 seconds) press and hold the House/On button.
The green light turns on.
3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above.
Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.
Hold the button for 3 seconds on your last press.
The red light then reports the setting with 1, 2, 3, or 4 blinks.