Difference between revisions of "NEW AirSight App Features"

From X10Wiki
Jump to navigation Jump to search
(Created page with "'''Here is a simple guide that will walk you through the features available in the AirSight App''' File:NewAppLogo.JPG ==Getting to know the AirSight app== '''Upon run...")
 
 
(29 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
  
−
==Getting to know the AirSight app==
+
==GETTING TO KNOW THE X10 AIRSIGHT APP==
  
−
'''Upon running the app for the first time you will be presented with a blank CAMERA LIST'''
+
'''Upon running the app for the first time you will be presented with the ADD CAMERA page'''
  
−
[[File:EMPTY.png]]
+
[[File:NEWAPP1.png]]
  
  
Line 14: Line 14:
  
  
 +
'''Subsequent visits will bring you directly to the CAMERAS tab '''
  
  
−
==CAMERA Tab==
+
[[File:NEWAPP2B.png]]
  
−
'''After you've added your cameras to the app - you will return to the ADD CAMERA tab to see your list of cameras as well as their status'''
 
  
−
[[File:TheNewCameraList.png]]
 
  
  
−
'''Use the EDIT button to delete cameras from your list'''
+
==CAMERA Tab==
  
−
[[File:DELETE.png]]
+
'''After you've added your cameras to the app - the ADD CAMERA tab will show your list of cameras as well as their status'''
  
 +
[[File:NEWAPP3B.png]]
  
−
'''The SEARCH BAR can be used to quickly locate a specific camera in your list'''
+
*'''GREEN''' = Online
 +
*'''YELLOW''' = Incorrect Password
 +
*'''BLACK''' = Offline
  
−
[[File:SEARCH.png]]
 
  
  
 +
'''Use the EDIT CAMS button to delete cameras from your list or access their settings menu'''
  
−
'''To edit the settings for the camera tap the SETTINGS ARROW to the right of the camera name to access the EDIT CAMERA MENU'''
+
[[File:NEWAPP4B.png]]
  
−
[[File:TheNewCameraListArrow.png]]
 
  
  
  
−
'''From the EDIT CAMERA MENU you can:'''
 
  
−
[[File:EditCameraMenu2.png]]
+
==LIVE VIEW==
  
−
* '''Rename the camera'''
+
'''To view live video tap the image of your camera on the CAMERA tab to access the LIVE VIEW menu'''
−
* '''Access the ADVANCED SETTINGS MENU'''
 
−
* '''Reconnect the camera if it's gone off line.'''
 
−
* '''Reboot the camera'''
 
  
−
'''NOTE''': ''The PASSWORD field, while editable, will NOT change the P2P password for your camera. (See the Security Code Menu section below).''
+
[[File:NEWAPP12.png]]
 +
[[File:NEWAPP12B.png]]
  
 +
'''If your camera model has the ability to pan and tilt, use the blue arrows located on the live image to PAN/TILT your camera'''
  
 +
'''While the phone is in horizontal orientation you can swap between the CONTROLS and INFORMATION tabs'''
  
−
==Advanced Settings Menu==
+
===Controls Tab===
  
−
'''The ADVANCED SETTINGS menu shows the current setting for the camera.'''
+
'''The CONTROLS tab offers the following controls:'''
  
−
'''To edit tap the RIGHT ARROW button to access that setting's menu options'''.
+
*'''Continuous Pan''': Use this button to tell your camera to continuously pan left and right - tap again to stop.
 +
*'''Continuous Til''': Use this button to tell your camera to continuously tilt up and down - tap again to stop.
 +
*'''Take a Snapshot''': Snapshots will be saved in the PHOTOS & VIDEO tab
 +
*'''Record Live Video''': Videos will be saved in the PHOTOS & VIDEO tab
 +
*'''Listen and Talk with Two-Way Audio''': ''(XX60A and XX70A PTZ cameras require external microphones and speakers -not included)''
 +
*'''Adjust the Quality of the Video'''
 +
*'''Set Preset Positions''': Use this button to program in up to 8 preset positions for your camera.
 +
*'''Go To Preset Positions''': Use this button to tell your camera to go to one of the 8 preset positions you programmed.
 +
*'''Zoom In and Zoom Out''': If your camera model has the ability to zoom you can do so from these buttons
 +
*'''Access the Camera's Settings'''
  
−
[[File:AdvancedSettingsMenu2.png]]
 
  
 +
===Information Tab===
  
 +
'''The INFORMATION tab offers the following information:'''
  
−
===Security Code Menu===
+
*'''Camera Name''': Displays the name designated for the camera
 +
*'''Camera Status''': Displays the current status of the camera
 +
*'''Last Access Time''': Displays the date and time the camera was last access via the app.
 +
*'''Storage Status''': Displays the current status of the SDCard
 +
*'''Network Spped''': Displays the network speed of the camera.
 +
*'''IP Address''': If the mobile devices is on the same internal network as the camera, the internal IP [INT] will be displayed here. Otherwise the external [EXT] IP of the camera will be listed
  
−
'''You can change the P2P password for your camera from the SECURITY CODE menu'''
 
  
−
* '''OLD''': Type the password your want to change
 
−
* '''NEW''': Type your newly chosen password
 
−
* '''CONFIRM''': Re-Type your newly chosen password
 
−
* Tap '''OK''' to SAVE.
 
  
  
−
[[File:SecurityCodeMenu.png]]
 
  
  
 +
'''While your phone is in vertical orientation you can access the following features by clicking on the appropriate icon located along the bottom of the screen:'''
  
−
===Video Quality Menu===
+
[[File:NEWAPP23.png]]
  
−
'''Use the VIDEO QUALITY menu to adjust the quality of the image'''
 
  
−
[[File:VideoQualityMenu.png]]
+
*'''Reverse''': Reverses the image should you need to mount the camera upside down
 +
*'''Mirror''': Reverses to a mirrored image of the live view of the camera
 +
*'''Contrast''': Adjusts the contrast of the image
 +
*'''Brightness''': Adjusts the brightness of the image
 +
*'''Take a Snapshot''': Snapshots will be saved in the PHOTOS & VIDEO tab
 +
*'''Record Live Video''': Videos will be saved in the PHOTOS & VIDEO tab
 +
*'''Full Screen''': Hides the control icons
 +
*'''Zoom In and Zoom Out''': If your camera model has the ability to zoom you can do so from these buttons
  
  
  
−
===Video Flip Menu===
 
  
−
'''If the need to mount the camera in an abnormal position arises, use the VIDEO FLIP menu to change the orientation of the image:'''
 
  
−
* '''NORMAL''': Default orientation
 
−
* '''VERTICAL FLIP''': For mounting camera upside down.
 
−
* '''HORIZONTAL FLIP''': Mirror Image orientation
 
−
* '''VERTICAL AND HORIZONTAL FLIP''': Both
 
  
 +
==CAMERA SETTINGS==
  
−
[[File:VideoFlipMenu.png]]
+
'''From the camera's SETTINGS menu you can:'''
  
 +
* '''Change the Camera's Password'''
 +
* '''Access the WiFi Settings'''
 +
* '''Adjust the Date/Time Settings'''
 +
* '''Access the Alarm Settings'''
 +
* '''Update Email Settings'''
 +
* '''Access the Motion Detection Settings'''
 +
* '''Adjust the SDCard settings'''
 +
* '''Check the Camera's Firmware Version'''
 +
* '''Set the Environment'''
  
  
−
===Environmental Mode Menu===
+
'''NOTE''': ''The PASSWORD field, while editable, will NOT change the P2P password for your camera. (See the Change Password Menu section below).''
  
−
'''Use ENVIRONMENT MODE menu to select the appropriate mode for the cameras viewing environment:'''
+
[[File:NEWAPP5B.png]]
  
−
[[File:EnvironModeMenu.png]]
 
  
  
−
* '''INDOOR MODE''': Used for normal indoor environments (50-60Hz)
 
−
 
−
Power line frequency or mains frequency is the frequency of the oscillations of alternating current (AC) in an electric power grid transmitted from a power plant to the end-user. In large parts of the world this is 50 Hz, although here in America, and some parts of Asia it is typically 60 Hz. AirSight IP cameras have multi-voltage (100-240VAC, 50-60Hz) power supplies for use in both environments - the Light Frequency is simply to communicate to the software which one is in use - however it is unlikely that changing from 50Hz to 60Hz will provide a noticeable difference.
 
  
  
−
* '''OUTDOOR MODE''': Used for cameras mounted outdoors or facing out windows
+
===Change Password Menu===
  
−
'''NOTE''': ''Facing a camera out a window renders them useless for night time viewing due to the reflection of the IR LEDs.''  
+
'''You can change the P2P password for your camera from the CHANGE PASSWORD menu'''
  
 +
* '''OLD PWD''': Type the password your want to change
 +
* '''NEW PWD''': Type your newly chosen password
 +
* '''CONFIRM''': Re-Type your newly chosen password
 +
* Tap '''SAVE'''
  
−
* '''NIGHT MODE''': Select this mode if Night Vision is the sole operating environment
 
  
−
The AirSight IP cameras will switch to Night Vision in all environmental modes when a change in light is detected. NIGHT MODE should only be chosen if the camera will not be utilized in daylight environments.
+
[[File:NEWAPP5.5.png]]
  
  
Line 125: Line 144:
 
===WiFi Menu===
 
===WiFi Menu===
  
−
'''Use the WIFI menu to program the camera to your wireless network'''
+
'''Use the WIFI menu to set a different wireless network'''
  
−
'''Locate your wireless network from the list of available networks'''
+
*Locate your wireless network from the list of available networks
  
−
[[File:WiFiMenu.png]]
+
*Type in your WiFi password (case sensitive) and tap OK
  
 +
[[File:NEWAPP6B.png]]
  
−
'''Tap your network name in the CHOOSE A NETWORK list to access the JOIN NETWORK menu'''
 
  
−
[[File:JoinNetMenu.png]]
 
  
−
'''Type in your WiFi password (case sensitive) and tap JOIN'''
 
  
 +
===Date/Time Settings Menu===
  
 +
'''Use the DATE/TIME SETTINGS menu to sync the camera's date and time with your smartphone or tablet'''
  
 +
'''''Please note that this feature is not supported on all models - the camera must be an [[XX69A]], [[XX70A]] or newer to utilize this feature'''''
  
−
===Motion Detection Menu===
+
[[File:NEWAPP7B.png]]
  
−
'''Since the AirSight IP cameras have built-in motion detection the AirSight app can track each instance as an event and save it to the EVENTS list on the EVENTS tab.'''
 
  
−
'''Use the MOTION DETECTION menu to adjust the camera's sensitivity to motion.'''
 
  
−
[[File:MotionDetectMenu.png]]
 
  
 +
===Alarm Settings Menu===
  
 +
'''If you have an external siren or output switch connected to the IO pins on the back of the camera you can access the settings for the inputs from the ALARM SETTINGS menu'''
  
−
'''If you own an AirSight HD SD P2P camera ([[XX59A]]) you can also setup the camera to record video on motion to the SD card.'''
+
More information regarding the I/O Pins can be found [[AirSight_Alarm_Input_Armed_/IO_Linkage_on_Alarm#IO_Pins_for_IO_Alarm_Linkage | '''here''']].
  
−
*''Instructions can be found: [[AirSight H264 Motion Recording App Setup|'''HERE''']]''
+
[[File:NEWAPP8.png]]
  
  
  
  
−
===About Device Menu===
+
===Mail Settings Menu===
  
−
'''The cameras current firmware version can be located in the ABOUT DEVICE menu under VERSION'''
+
'''Use the MAIL SETTINGS menu to enter the credentials for the email address you would like the camera to use to send notifications via email'''
  
−
'''For AirSight models with SD recording features, you can also determine the size of the on-board SD card (not included) as well as the amount of free space available.'''
+
'''''Please note that this feature is not supported on all models - the camera must be an [[XX69A]], [[XX70A]] or newer to utilize this feature'''''
  
−
[[File:AboutDeviceMenu.png]]
+
[[File:NEWAPP9.png]]
  
  
  
  
−
===Indicator Menu===
+
===Motion Detection Menu===
  
−
'''Use the INDICATOR menu to adjust the frequency at which the red indicator light on the front of the camera flashes.'''  
+
'''Use the MOTION DETECTION menu to turn motion detection ON/OFF, adjust the sensitivity of the detection, and set the required action when a motion event is triggered'''
  
−
[[File:IndicatorMenu.png]]
 
  
 +
[[File:NEWAPP10.png]]
  
  
  
−
==Live View==
 
  
−
'''To view live video tap the image of your camera on the CAMERA tab to access the LIVE VIEW menu'''
+
===SDCard Settings Menu===
  
−
[[File:VIEW.png]]
+
'''If your camera model includes an on board SDCard slot, you can check the available capacity of the SDCard, format the SDCard, and set the recording frequency to the SDCard from the SDCARD SETTINGS menu'''
  
 +
[[File:NEWAPP11.png]]
 +
[[File:NEWAPP11B.png]]
  
  
−
'''While your phone is in vertical orientation you can access all of the features available for your camera by clicking on the small icons located along the bottom of the screen:'''
 
  
−
[[File:F LiveView.png]]
 
  
 +
===Firmware Version Menu===
  
−
*'''Record Video'''
+
'''The FIRMWARE VERSION menu displays your camera's current firmware version'''
−
*'''Take a Snapshot'''
 
−
*'''Listen and Talk with Two-Way Audio''': ''(XX60A PTZ requires external mic and speaker -not included)''
 
−
*'''Set Preset Position'''
 
−
*'''Call Preset Position'''
 
  
 +
[[File:NEWAPP13.png]]
  
  
−
'''While the phone is in horizontal orientation you can access:'''
 
  
−
*'''Record Video'''
 
−
*'''Take a Snapshot'''
 
−
*'''Listen and Talk with Two-Way Audio''': ''(XX60A PTZ requires external mic and speaker -not included)''
 
  
−
[[File:F RotateNew.png]]
+
===Environmental Mode Menu===
  
 +
'''Use the ENVIRONMENT MODE menu to select the appropriate mode for the cameras viewing environment:'''
  
 +
[[File:NEWAPP14.png]]
  
−
'''If your camera model has the ability to zoom - you will notice additional buttons added:''' [[File:F Zoom.png]]
 
  
−
'''To zoom your camera in and out you can either pinch/spread the image with your fingers or use the'''  
+
* '''INDOOR MODE''': Used for normal indoor environments (50-60Hz)
  
 +
Power line frequency or mains frequency is the frequency of the oscillations of alternating current (AC) in an electric power grid transmitted from a power plant to the end-user. In large parts of the world this is 50 Hz, although here in America, and some parts of Asia it is typically 60 Hz. AirSight IP cameras have multi-voltage (100-240VAC, 50-60Hz) power supplies for use in both environments - the Light Frequency is simply to communicate to the software which one is in use - however it is unlikely that changing from 50Hz to 60Hz will provide a noticeable difference.
  
−
'''Zoom In''' [[File:F ZoomI.png]] '''and Zoom Out''' [[File:F ZoomO.png]] '''icons'''.
 
  
 +
* '''OUTDOOR MODE''': Used for cameras mounted outdoors or facing out windows
  
 +
'''NOTE''': ''Facing a camera out a window renders them useless for night time viewing due to the reflection of the IR LEDs.''
  
−
===Record Video===
 
−
 
−
'''To record live video simply tap the video camera icon to access the RECORD CONTROL menu'''
 
−
 
−
[[File:F MotionRecord.png]]
 
−
 
−
 
−
 
−
'''From the RECORD CONTROL menu you can start and stop your recordings.'''
 
−
 
−
[[File:F RecordControl.png]]
 
−
 
−
 
−
 
−
===Snapshots===
 
−
 
−
'''To take snapshots simply tap the camera icon'''
 
−
 
−
[[File:F SnapShot.png]]
 
−
 
−
 
−
 
−
'''You will receive a message that a snapshot was successfully saved to your PHOTOS folder of your phone.'''
 
−
 
−
[[File:F SnapShotSaved.png]]
 
−
 
−
 
−
 
−
===Listen and Talk with Two-Way Audio===
 
−
 
−
'''Most of the AirSight IP camera models include an on-board microphone and speaker providing two-way audio communication.'''
 
−
 
−
[[File:F Audio.png]]
 
−
 
−
 
−
 
−
''For AirSight IP camera models that do not (XX60A PTZ) an external microphone and speaker are required to utilize this feature.''
 
−
 
−
'''Simply tap the speaker icon to access the AUDIO CONTROL menu'''
 
−
 
−
[[File:AudioControl.png]]
 
−
 
−
 
−
 
−
'''The audio status box will let you know what mode the camera is currently in: Mute, Listen, or Speak.'''
 
−
 
−
[[File:F AudioStatus.png]]
 
−
 
−
 
−
 
−
===Presets===
 
−
 
−
'''Most of the AirSight IP camera models can pan and tilt and some even have the ability to zoom.'''
 
−
 
−
'''Use the preset feature to program up to 16 preset positions for your camera to quickly retrieve later.'''
 
−
 
−
[[File:F Preset.png]]
 
−
 
−
 
−
 
−
'''To program a preset position, pan/tilt/zoom to the desired location and tap the PRESET SAVE icon'''
 
−
 
−
[[File:F PresetSave.png]]
 
−
 
−
 
−
 
−
'''A numbered menu appears - tap a number to program that preset position'''
 
−
 
−
[[File:F PresetSaveChoose.png]]
 
−
 
−
 
−
 
−
'''To call that preset position - tap the PRESET icon'''
 
−
 
−
[[File:F PresetGo.png]]
 
−
 
−
 
−
 
−
'''A numbered menu appears - tap a number to call that preset position'''
 
−
 
−
'''Your camera will pan/tilt/zoom to the appointed position that you set.'''
 
−
 
−
[[File:F PresetGoChoose.png]]
 
−
 
−
 
−
 
−
===Exit Live View===
 
−
 
−
'''To exit the Live View menu simply tap the BACK button to return to your camera list to view other cameras.'''
 
−
 
−
[[File:F Back.png]]
 
−
 
−
==EVENT Tab==
 
−
 
−
'''If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab'''
 
−
 
−
[[File:NewEvents.png]]
 
−
 
−
 
−
 
−
'''To access the list of events for each camera tap the ARROW to the right of the camera name to access it's EVENT LIST'''
 
−
 
−
[[File:NewEventsArrow.png]]          [[File:NewEventList.png]]
 
−
 
−
 
−
 
−
'''Use the SEARCH button to quickly navigate to a specific event based on when the event occurred'''
 
−
 
−
[[File:EventListSearch.png]]
 
−
 
−
 
−
* '''''Note''': Events cannot be deleted from the app - the only way to remove them from your phone is to delete the app.''
 
  
  
  
  
−
==LOCALRECORD Tab==
+
==PHOTOS & VIDEO Tab==
  
 
'''Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS'''
 
'''Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS'''
  
−
[[File:LocalRecordTabNew.png]]
+
[[File:NEWAPP15.png]]
  
  
Line 344: Line 247:
 
'''Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them'''
 
'''Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them'''
  
−
[[File:LRTN.png]]
+
[[File:NEWAPP17.png]]
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
'''Tap the ARROW to the right of the camera's name to access the PHOTO or VIDEO menu'''
 
−
 
 
−
[[File:LRT2N.png]]            [[File:NewCameraPhotos.png]]
 
−
 
 
−
 
 
−
 
 
  
  
 
'''Tap the PHOTO or VIDEO to view'''
 
'''Tap the PHOTO or VIDEO to view'''
  
−
[[File:NewPhotoView.png]]        [[File:NewPhotoViewIcons.png]]
+
[[File:NEWAPP16.png]]
−
 
 
−
 
 
−
'''Use the DELETE and SAVE icons to discard or save to your PHOTOS folder on your phone.'''
 
−
 
 
−
 
 
−
 
 
−
 
 
−
'''If this is the first time saving PHOTOS or VIDEO tap OK when prompted'''
 
−
 
 
−
[[File:NewAccessPhotoOk.png]]
 
−
 
 
−
 
 
−
 
 
−
'''The app will notify you the image was saved successfully - tap OK to return to your list of photos or videos'''
 
−
 
 
−
[[File:NewSaveToAlbum.png]]
 
  
−
==ADD CAMERA Tab==
 
  
−
'''Additional information on how to use these menus can be found here:'''
+
'''Use the DEL button to discard an individual PHOTO/VIDEO or DEL ALL to discard all PHOTO/VIDEOS in the menu.'''
  
−
*[[Ip Camera Viewer for X10 Airsight]]
+
[[File:NEWAPP16B.png]]                      [[File:NEWAPP17B.png]]
  
  
−
'''The ADD CAMERA menu lists all of the IP cameras found connected to the local network'''
 
  
−
[[File:TheNewAddCamera.png]]
 
  
  
 +
==SD CARD Tab==
  
−
'''Use the REFRESH button to refresh the list of cameras in "Camera Found! (0)" list if your camera doesn't automatically show up'''
+
'''If your camera model includes an on board SDCard slot, you can access the snapshots and videos stored on the SDCard from the SDCARD tab'''
  
−
[[File:RefreshAddCamera.png]]
 
  
 +
[[File:NEWAPP18.png]]
  
  
−
'''Tap your camera in the "Camera Found! (0)" list to access the ADD CAMERA menu'''
 
  
−
[[File:TNACM.png]]
 
  
  
 +
==MORE INFO Tab==
  
−
'''If you are not at the physical location of the camera you can manually add it by tapping the ADD button to enter in the camera's credentials'''
+
'''Use the MORE INFO tab to access the TRAFFIC STATISTICS, HELP, and ABOUT menus'''
  
−
[[File:NewManualAddCamera.png]]            [[File:TheNewAddCameraMenu.png]]
+
[[File:NEWAPP19.png]]
  
  
  
−
'''You can also add your camera by scanning the QR code sticker on the label'''
 
  
−
*'''''Note''': If you have trouble viewing the camera after using this method we recommend deleting the camera from the app and re-installing using the steps found [[Ip Camera Viewer for X10 Airsight|'''HERE''']]''
+
===TRAFFIC STATISTIC===
  
 +
'''From the TRAFFIC STATISTICS page you can program the allotted usage for your camera per month'''
  
−
'''Focus the QR code in the center of the box on the screen - once the code is scanned it automatically opens the ADD CAMERA menu'''
+
[[File:NEWAPP20.png]]
  
  
−
[[File:QRADD.png]]            [[File:QRScanMenu.png]]
 
  
  
 +
===HELP===
  
−
'''Enter the P2P password for the camera (default 000000) and press SAVE'''
+
'''The HELP page offers a visual image of the options in the app'''
  
−
[[File:TNACM2.png]]
+
[[File:NEWAPP21.png]]
  
  
  
  
−
==INFO Tab==
+
===ABOUT===
  
−
'''Your current version of the app can be found on the APP INFO menu of the INFO tab'''
+
'''The ABOUT page displays the current version of the app'''
  
−
[[File:TheNewInfoTab.png]]
+
[[File:NEWAPP22.png]]
  
  

Latest revision as of 01:59, 9 January 2016

Here is a simple guide that will walk you through the features available in the AirSight App

NewAppLogo.JPG


GETTING TO KNOW THE X10 AIRSIGHT APP

Upon running the app for the first time you will be presented with the ADD CAMERA page

NEWAPP1.png


Use the icons along the bottom of the screen to navigate between the different tabs


Subsequent visits will bring you directly to the CAMERAS tab


NEWAPP2B.png



CAMERA Tab

After you've added your cameras to the app - the ADD CAMERA tab will show your list of cameras as well as their status

NEWAPP3B.png

  • GREEN = Online
  • YELLOW = Incorrect Password
  • BLACK = Offline


Use the EDIT CAMS button to delete cameras from your list or access their settings menu

NEWAPP4B.png



LIVE VIEW

To view live video tap the image of your camera on the CAMERA tab to access the LIVE VIEW menu

NEWAPP12.png NEWAPP12B.png

If your camera model has the ability to pan and tilt, use the blue arrows located on the live image to PAN/TILT your camera

While the phone is in horizontal orientation you can swap between the CONTROLS and INFORMATION tabs

Controls Tab

The CONTROLS tab offers the following controls:

  • Continuous Pan: Use this button to tell your camera to continuously pan left and right - tap again to stop.
  • Continuous Til: Use this button to tell your camera to continuously tilt up and down - tap again to stop.
  • Take a Snapshot: Snapshots will be saved in the PHOTOS & VIDEO tab
  • Record Live Video: Videos will be saved in the PHOTOS & VIDEO tab
  • Listen and Talk with Two-Way Audio: (XX60A and XX70A PTZ cameras require external microphones and speakers -not included)
  • Adjust the Quality of the Video
  • Set Preset Positions: Use this button to program in up to 8 preset positions for your camera.
  • Go To Preset Positions: Use this button to tell your camera to go to one of the 8 preset positions you programmed.
  • Zoom In and Zoom Out: If your camera model has the ability to zoom you can do so from these buttons
  • Access the Camera's Settings


Information Tab

The INFORMATION tab offers the following information:

  • Camera Name: Displays the name designated for the camera
  • Camera Status: Displays the current status of the camera
  • Last Access Time: Displays the date and time the camera was last access via the app.
  • Storage Status: Displays the current status of the SDCard
  • Network Spped: Displays the network speed of the camera.
  • IP Address: If the mobile devices is on the same internal network as the camera, the internal IP [INT] will be displayed here. Otherwise the external [EXT] IP of the camera will be listed




While your phone is in vertical orientation you can access the following features by clicking on the appropriate icon located along the bottom of the screen:

NEWAPP23.png


  • Reverse: Reverses the image should you need to mount the camera upside down
  • Mirror: Reverses to a mirrored image of the live view of the camera
  • Contrast: Adjusts the contrast of the image
  • Brightness: Adjusts the brightness of the image
  • Take a Snapshot: Snapshots will be saved in the PHOTOS & VIDEO tab
  • Record Live Video: Videos will be saved in the PHOTOS & VIDEO tab
  • Full Screen: Hides the control icons
  • Zoom In and Zoom Out: If your camera model has the ability to zoom you can do so from these buttons




CAMERA SETTINGS

From the camera's SETTINGS menu you can:

  • Change the Camera's Password
  • Access the WiFi Settings
  • Adjust the Date/Time Settings
  • Access the Alarm Settings
  • Update Email Settings
  • Access the Motion Detection Settings
  • Adjust the SDCard settings
  • Check the Camera's Firmware Version
  • Set the Environment


NOTE: The PASSWORD field, while editable, will NOT change the P2P password for your camera. (See the Change Password Menu section below).

NEWAPP5B.png



Change Password Menu

You can change the P2P password for your camera from the CHANGE PASSWORD menu

  • OLD PWD: Type the password your want to change
  • NEW PWD: Type your newly chosen password
  • CONFIRM: Re-Type your newly chosen password
  • Tap SAVE


NEWAPP5.5.png



WiFi Menu

Use the WIFI menu to set a different wireless network

  • Locate your wireless network from the list of available networks
  • Type in your WiFi password (case sensitive) and tap OK

NEWAPP6B.png



Date/Time Settings Menu

Use the DATE/TIME SETTINGS menu to sync the camera's date and time with your smartphone or tablet

Please note that this feature is not supported on all models - the camera must be an XX69A, XX70A or newer to utilize this feature

NEWAPP7B.png



Alarm Settings Menu

If you have an external siren or output switch connected to the IO pins on the back of the camera you can access the settings for the inputs from the ALARM SETTINGS menu

More information regarding the I/O Pins can be found here.

NEWAPP8.png



Mail Settings Menu

Use the MAIL SETTINGS menu to enter the credentials for the email address you would like the camera to use to send notifications via email

Please note that this feature is not supported on all models - the camera must be an XX69A, XX70A or newer to utilize this feature

NEWAPP9.png



Motion Detection Menu

Use the MOTION DETECTION menu to turn motion detection ON/OFF, adjust the sensitivity of the detection, and set the required action when a motion event is triggered


NEWAPP10.png



SDCard Settings Menu

If your camera model includes an on board SDCard slot, you can check the available capacity of the SDCard, format the SDCard, and set the recording frequency to the SDCard from the SDCARD SETTINGS menu

NEWAPP11.png NEWAPP11B.png



Firmware Version Menu

The FIRMWARE VERSION menu displays your camera's current firmware version

NEWAPP13.png



Environmental Mode Menu

Use the ENVIRONMENT MODE menu to select the appropriate mode for the cameras viewing environment:

NEWAPP14.png


  • INDOOR MODE: Used for normal indoor environments (50-60Hz)

Power line frequency or mains frequency is the frequency of the oscillations of alternating current (AC) in an electric power grid transmitted from a power plant to the end-user. In large parts of the world this is 50 Hz, although here in America, and some parts of Asia it is typically 60 Hz. AirSight IP cameras have multi-voltage (100-240VAC, 50-60Hz) power supplies for use in both environments - the Light Frequency is simply to communicate to the software which one is in use - however it is unlikely that changing from 50Hz to 60Hz will provide a noticeable difference.


  • OUTDOOR MODE: Used for cameras mounted outdoors or facing out windows

NOTE: Facing a camera out a window renders them useless for night time viewing due to the reflection of the IR LEDs.



PHOTOS & VIDEO Tab

Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS

NEWAPP15.png


Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them

NEWAPP17.png


Tap the PHOTO or VIDEO to view

NEWAPP16.png


Use the DEL button to discard an individual PHOTO/VIDEO or DEL ALL to discard all PHOTO/VIDEOS in the menu.

NEWAPP16B.png NEWAPP17B.png



SD CARD Tab

If your camera model includes an on board SDCard slot, you can access the snapshots and videos stored on the SDCard from the SDCARD tab


NEWAPP18.png



MORE INFO Tab

Use the MORE INFO tab to access the TRAFFIC STATISTICS, HELP, and ABOUT menus

NEWAPP19.png



TRAFFIC STATISTIC

From the TRAFFIC STATISTICS page you can program the allotted usage for your camera per month

NEWAPP20.png



HELP

The HELP page offers a visual image of the options in the app

NEWAPP21.png



ABOUT

The ABOUT page displays the current version of the app

NEWAPP22.png



Related Products

Retrieved from "https://kbase.x10.com/index.php?title=NEW_AirSight_App_Features&oldid=13655"