Difference between revisions of "Comparison of All Motion Sensors"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 37: | Line 37: | ||
===Related Articles=== | ===Related Articles=== | ||
| + | |||
| + | [[Motion Sensors]] | ||
[[Motion Sensors with a Camera System]] | [[Motion Sensors with a Camera System]] | ||
| − | + | ||
[[Category:hardware]] | [[Category:hardware]] | ||
[[Category:frequently asked questions]] | [[Category:frequently asked questions]] | ||
Revision as of 22:07, 12 May 2014
Introduction
All HawkEye (MS12A), HawkEye II (MS13A), EagleEye (MS14A), and ActiveEye (MS16A) Motion Sensors share the following characteristics:
- Passive Infrared (PIR) Detection
- Detect motion approximately 20 feet distant
- 100 foot transmission range (maximum)
- Configurable to all House and Unit codes
Note: At a minimum, a Transceiver (TM751 or RR501) is required to test them.
The following chart compares the differences between the Motion Sensors:
| X10 Part | PRO Part | Detection | Dawn/Dusk Detection | No Motion Off Time | Weather Resistant |
| MS12A | N/A | Always | Fixed Enabled | Fixed 6 Minutes | No |
| MS13A | PMS02 | Always or Night Only | Fixed Enabled | Variable | No |
| MS14A | PMS03 | Always or Night Only | Fixed Enabled | Variable | Yes |
| MS16A | PMS04 | Always or Night Only | Variable | Variable | Yes |
Setup
- MS12A HawkEye Motion Sensor Setup
- MS13A HawkEye II Motion Sensor Setup
- MS14A Eagle Eye Motion Sensor Setup
- MS16A Active Eye Motion Sensor Setup