Difference between revisions of "Mini Timer Troubleshooting"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 4: | Line 4: | ||
'''1) Is it flashing 18:88?''' | '''1) Is it flashing 18:88?''' | ||
| − | *YES = [[18:88 Error]] | + | *YES = '''[[18:88 Error]]''' |
*NO = Go to Step 2 | *NO = Go to Step 2 | ||
Revision as of 19:52, 10 June 2015
If you have problems answering these questions, please refer to MiniTimer Setup.
1) Is it flashing 18:88?
- YES = 18:88 Error
- NO = Go to Step 2
2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?
- YES = Go to Step 3
- NO = If the MiniTimer does not light up at all then it may have an issue.
3) Can you control all your modules by pushing the buttons on the MiniTimer?
- YES = Go to Step 4
4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct?
- YES = Go to Step 5
- NO = Double-check that your answer to 3 is Yes; if so, your MiniTimer may have an issue.
5) Are you having difficulties deleting an existing timer?
- NO = Please email support@x10.com with a detailed description of the problem you are experiencing.
If you have problems answering these questions, please refer to MiniTimer Setup.