Difference between revisions of "Manual Lens Adjustment"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 1: | Line 1: | ||
'''How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:''' | '''How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:''' | ||
| − | Unscrew and remove the dome by rotating it counterclockwise. | + | 1) Unscrew and remove the dome by rotating it counterclockwise. |
| Line 7: | Line 7: | ||
| − | Locate and remove the screw at the base of the lens. | + | 2) Locate and remove the screw at the base of the lens. |
| Line 13: | Line 13: | ||
| − | Gently twist and pull up on the lens to make the adjustment. | + | 3) Gently twist and pull up on the lens to make the adjustment. |
| Line 19: | Line 19: | ||
| − | Continue to make slight adjustments until the image is focused. | + | 4) Continue to make slight adjustments until the image is focused. |
| Line 25: | Line 25: | ||
| − | Replace the screw at the base of the lens and replace the dome by rotating it clockwise. | + | 5) Replace the screw at the base of the lens and replace the dome by rotating it clockwise. |
Revision as of 17:31, 3 August 2016
How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:
1) Unscrew and remove the dome by rotating it counterclockwise.
2) Locate and remove the screw at the base of the lens.
3) Gently twist and pull up on the lens to make the adjustment.
4) Continue to make slight adjustments until the image is focused.
5) Replace the screw at the base of the lens and replace the dome by rotating it clockwise.