Difference between revisions of "Testing A KR15A On A2"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
|||
| Line 5: | Line 5: | ||
==Answer== | ==Answer== | ||
| − | Some Big Red Buttons do not send the A1 command properly, | + | Some Big Red Buttons do not send the A1 command properly, we recommend setting the Big Red Button to A2. |
| + | |||
| + | *Open the battery cover and hold down UNIT until the LED blinks twice, then release. | ||
| + | |||
| + | *Push and release UNIT; the light will blink on and off. | ||
| + | |||
| + | *Push and release UNIT again; the light will blink on and off, stay off for 3 seconds, then blink twice. | ||
| + | |||
| + | *Set your Chime Module to A2 and plug it in next to a Transceiver set to A. | ||
| + | |||
| + | *If the Big Red Button does not trigger the chime reliably when it is nearby, then it may have an issue. | ||
Latest revision as of 20:17, 9 June 2014
Question
My Big Red Button does not seem to trigger my chime. What can I try?
Answer
Some Big Red Buttons do not send the A1 command properly, we recommend setting the Big Red Button to A2.
- Open the battery cover and hold down UNIT until the LED blinks twice, then release.
- Push and release UNIT; the light will blink on and off.
- Push and release UNIT again; the light will blink on and off, stay off for 3 seconds, then blink twice.
- Set your Chime Module to A2 and plug it in next to a Transceiver set to A.
- If the Big Red Button does not trigger the chime reliably when it is nearby, then it may have an issue.