Difference between revisions of "Experiment With Magnet Placement"
m |
|||
| Line 5: | Line 5: | ||
==Answer== | ==Answer== | ||
| − | The magnet and switch can work in other configurations besides having the arrows pointing at each other. You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK. Test the position by opening and closing the door or window; if the LED on the DS10A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough. To cover bigger gaps, you can use a shim to bring the magnet closer | + | The magnet and switch can work in other configurations besides having the arrows pointing at each other. You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK. |
| + | |||
| + | Leave the main console in RUN1 or RUN2 mode when testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS10A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough. To cover bigger gaps, you can use a shim to bring the magnet closer. You could also try using a different, stronger magnet, instead of the magnet we provide. | ||
We cannot recommend any particular magnet sellers; I recommend doing [http://www.google.com/products?q=rare+earth+magnet a Google Products search for RARE EARTH MAGNET]. | We cannot recommend any particular magnet sellers; I recommend doing [http://www.google.com/products?q=rare+earth+magnet a Google Products search for RARE EARTH MAGNET]. | ||
| + | |||
| + | ==Related Articles== | ||
| + | |||
| + | [[Adding A Switch To A Door Sensor]] | ||
Revision as of 22:14, 22 December 2009
Question
I am installing my Door/Window sensor, but I cannot position the magnet and sensor so that their arrows are pointing exactly at each other. What can I do?
Answer
The magnet and switch can work in other configurations besides having the arrows pointing at each other. You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK.
Leave the main console in RUN1 or RUN2 mode when testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS10A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough. To cover bigger gaps, you can use a shim to bring the magnet closer. You could also try using a different, stronger magnet, instead of the magnet we provide.
We cannot recommend any particular magnet sellers; I recommend doing a Google Products search for RARE EARTH MAGNET.