Difference between revisions of "Differences Between the TM751 and RR501"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
|||
| Line 5: | Line 5: | ||
==Answer== | ==Answer== | ||
| − | + | *'''BOTH''' Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline. | |
| − | The RR501 '''will''' respond to powerline commands. The TM751 '''will not'''. | + | *The RR501 '''''will''''' respond to powerline commands. The '''TM751''' '''''will not'''''. |
The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed. | The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed. | ||
The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s. Unplug and replug each TM751 to fix lockups. | The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s. Unplug and replug each TM751 to fix lockups. | ||
Revision as of 23:14, 12 May 2014
Question
What is the difference between the RR501 and the TM751?
Answer
- BOTH Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline.
- The RR501 will respond to powerline commands. The TM751 will not.
The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed.
The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s. Unplug and replug each TM751 to fix lockups.