Setting Up Video Sender with Tivo

Introduction

This guide should help you in quickly setting up the X10 Video Sender with Tivo.

Setup

Unpack these items.

vidsend_1_parts_vk82a.gif

Connect the wireless video receiver to power and plug it into a wall outlet.

vidsend_2_rx_power_vk82a.gif

mk11mk12_reca.gif

Connect the video receiver to your second TV, the one where you want to view your Tivo recordings.

vidsend_3_rx_rca_vk82a.jpg

Connect the video transmitter to the VCR connection (Output 2) on your Tivo, plug it into power, and turn it on.

vidsend_4_tx_tivo_vk82a.jpg

Select your TV's video input just like you would for Tivo. Your Tivo screen should appear.

vidsend_5_video_select_vk82a.jpg

Adjust the antennas on the transmitter and receiver to improve the picture on your TV. Point the sides marked with 4 squares toward each other.

Alternate Receiver Setup: Coaxial Connection

If your TV does not have RCA audio/video inputs, or if they are already in use, you can connect the Video Receiver to your TV using the coaxial connection. Instead of following Step 3 (above), do the following:

• Find the included coaxial cable.
• Connect one end of the coaxial cable to the coaxial input on your TV. It might be labeled "coax," "cable," or even "antenna."
• Connect the other end of the coaxial cable to the output on the Video Receiver.
• Plug the Video Receiver into power, and make sure the power switch on its left side is turned on.
• Use the TV CHANNEL switch on the bottom of the Video Receiver to select the channel on which to display video from the Video Receiver--Channel 3 or Channel 4.

To view the Video Sender transmission, change the channel on your TV to the one selected above.

Related Articles

Setting Up Video Sender with a DVR

Setting Up Video Sender with a DVD Player

Setting Up Video Sender with a VCR

Setting Up Video with a Cable Box

Setting Up Video Sender with a Game Console

Setting Up Video Sender with a Satellite Receiver