Difference between revisions of "Alarm Input Armed / IO Linkage on Alarm"

From X10Wiki
Jump to navigation Jump to search
Line 9: Line 9:
 
==Alarm Settings for Internet Explorer==
 
==Alarm Settings for Internet Explorer==
  
If you want to connect external alarm devices, when it’s an alarm input device, choose '''Alarm Input Armed''' to enable it, when it’s an output device, choose '''IO Linkage on Alarm''' to enable it.
+
If you want to connect external alarm devices:
 +
*If it’s an alarm INPUT device, choose '''Alarm Input Armed''' to enable it
 +
*If it’s an alarm OUTPUT device, choose '''IO Linkage on Alarm''' to enable it.
 +
 
  
 
[[Image:IOLINKAGEfirst.png]]
 
[[Image:IOLINKAGEfirst.png]]

Revision as of 22:31, 16 September 2014

Question

How do I setup my Airsight Cameras to use Alarm Input Armed / IO Linkage on Alarm?



Answer

Alarm Settings for Internet Explorer

If you want to connect external alarm devices:

  • If it’s an alarm INPUT device, choose Alarm Input Armed to enable it
  • If it’s an alarm OUTPUT device, choose IO Linkage on Alarm to enable it.


IOLINKAGEfirst.png

External Alarm: Set external alarm function ON/OFF.


IOLINKAGE2.png

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

IOLINKAGE3.png

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

IOLINKAGE4.png


Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

IOLINKAGE5.png

Action with Alarm: These are actions optional for external alarm triggered.

IOLINKAGE6.png

Alarm Settings for Safari, Chrome, Firefox

Click Alarm to enter the interface:

IOLINKAGE7.png

External Alarm: Set external alarm function ON/OFF.

IOLINKAGE8.png

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

IOLINKAGE9.png

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

IOLINKAGE10.png

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

IOLINKAGE11.png

Action with Alarm: These are actions optional for external alarm triggered.

IOLINKAGE12.png