Difference between revisions of "AirSight App Features"

Revision as of 00:35, 6 February 2015

Here is a simple guide that will walk you through the features available in the AirSight App

Getting to know the AirSight app

Upon running the app for the first time you will be presented with a blank CAMERA LIST

Use the icons along the bottom of the screen to navigate between the different tabs

CAMERA Tab

After you've added your cameras to the app - you will return the ADD CAMERA tab to see your list of cameras as well as their status

Use the EDIT button to delete cameras from your list

The SEARCH BAR can be used to quickly locate a specific camera in your list

To edit the settings for the camera tap the SETTINGS ARROW to the right of the camera name to access the EDIT CAMERA MENU

EDITCAMERAMENU

Will insert comments about these menus after images have been added

ADVANCEDSETTINGSALL

EVENT Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

To access the list of events for each camera tap the ARROW to the right of the camera name to access it's EVENT LIST

Use the SEARCH button to quickly navigate to a specific event based on when the event occurred

Note: Events cannot be deleted from the app - the only way to remove them from your phone is to delete the app.

LOCALRECORD Tab

Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS

LOCALRECORDTAB

Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them

Tap the ARROW to the right of the camera's name to access the PHOTO or VIDEO menu

Tap the PHOTO or VIDEO to view

Use the DELETE and SAVE icons to discard or save to your PHOTOS folder on your phone.

If this is the first time saving PHOTOS or VIDEO tap OK when prompted

The app will notify you the image was saved successfully - tap OK to return to your list of photos or videos

ADD CAMERA Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

QRSCANMENU

INFO Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

Related Products

@@ Line 132: / Line 132: @@
 [[File:TheNewInfoTab.png]]
-===Live View===
-While your phone is in vertical orientation you can access all of the features available for your camera by clicking on the small icons located along the bottom of the screen:
-[[File:F LiveView.png]]
-*'''Record Video'''
-*'''Take a Snapshot'''
-*'''Listen and Talk with Two-Way Audio''': ''(XX60A PTZ requires external mic and speaker -not included)''
-*'''Set Preset Position'''
-*'''Call Preset Position'''
-While the phone is in horizontal orientation you can access:
-*'''Record Video'''
-*'''Take a Snapshot'''
-*'''Listen and Talk with Two-Way Audio''': ''(XX60A PTZ requires external mic and speaker -not included)''
-[[File:F RotateNew.png]]
-If your camera model has the ability to zoom - you will notice additional buttons added: [[File:F Zoom.png]]
-To zoom your camera in and out you can either pinch/spread the image with your fingers or use the
-Zoom In [[File:F ZoomI.png]] and Zoom Out [[File:F ZoomO.png]] icons.
-===Record Video===
-To record live video simply tap the video camera icon to access the RECORD CONTROL menu
-[[File:F MotionRecord.png]]
-From the RECORD CONTROL menu you can start and stop your recordings.
-[[File:F RecordControl.png]]
-===Snapshots===
-To take snapshots simply tap the camera icon
-[[File:F SnapShot.png]]
-You will receive a message that a snapshot was successfully saved to your PHOTOS folder of your phone.
-[[File:F SnapShotSaved.png]]
-===Listen and Talk with Two-Way Audio===
-Most of the AirSight IP camera models include an on-board microphone and speaker providing two-way audio communication.
-[[File:F Audio.png]]
-''For AirSight IP camera models that do not (XX60A PTZ) an external microphone and speaker are required to utilize this feature.''
-Simply tap the speaker icon to access the AUDIO CONTROL menu
-[[File:AudioControl.png]]
-The audio status box will let you know what mode the camera is currently in: Mute, Listen, or Speak.
-[[File:F AudioStatus.png]]
-===Presets===
-Most of the AirSight IP camera models can pan and tilt and some have the ability to zoom.
-Use the preset feature to program up to 16 preset positions for your camera to quickly retrieve later.
-[[File:F Preset.png]]
-To program a preset position, pan/tilt/zoom to the desired location and tap the PRESET SAVE icon
-[[File:F PresetSave.png]]
-A numbered menu appears - tap a number to program that preset position
-[[File:F PresetSaveChoose.png]]
-To call that preset position - tap the PRESET icon
-[[File:F PresetGo.png]]
-A numbered menu appears - tap a number to call that preset position
-Your camera will pan/tilt/zoom to the appointed position that you set.
-[[File:F PresetGoChoose.png]]
-===Exit Live View===
-To exit the Live View menu simply tap the BACK button to return to your camera list to view other cameras.
-[[File:F Back.png]]
 ==Related Products==

Difference between revisions of "AirSight App Features"

Revision as of 00:35, 6 February 2015

Contents

Getting to know the AirSight app

CAMERA Tab

EVENT Tab

LOCALRECORD Tab

ADD CAMERA Tab

INFO Tab

Related Products

Navigation menu

Search