Difference between revisions of "Modules Turn On Immediately After Being Turned Off"
Jump to navigation
Jump to search
(Perl Automatic Add) |
X10MichaelC (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | Questions | + | == Questions == |
| + | |||
Why does my Lamp or Appliance Module turn on immediately after being turned off? | Why does my Lamp or Appliance Module turn on immediately after being turned off? | ||
| − | Answer | + | |
| + | == Answer == | ||
This is usually caused by the lamp or appliance being controlled by the X10 module. There are components in X10 modules that detect the switching of the physical switch on the controlled device (fluorescent lamps are common culprits). With certain devices, false signals are generated (usually from a dissipating charge), which trigger the local control feature in the module. To fix this problem, you can plug a cube tap (plug splitter) into the Module, and then plug a 7�W night light into the same Module along with the offending light/appliance. | This is usually caused by the lamp or appliance being controlled by the X10 module. There are components in X10 modules that detect the switching of the physical switch on the controlled device (fluorescent lamps are common culprits). With certain devices, false signals are generated (usually from a dissipating charge), which trigger the local control feature in the module. To fix this problem, you can plug a cube tap (plug splitter) into the Module, and then plug a 7�W night light into the same Module along with the offending light/appliance. | ||
| − | + | ||
| − | [ | + | [[category: Hardware]] |
Revision as of 00:12, 21 March 2006
Questions
Why does my Lamp or Appliance Module turn on immediately after being turned off?
Answer
This is usually caused by the lamp or appliance being controlled by the X10 module. There are components in X10 modules that detect the switching of the physical switch on the controlled device (fluorescent lamps are common culprits). With certain devices, false signals are generated (usually from a dissipating charge), which trigger the local control feature in the module. To fix this problem, you can plug a cube tap (plug splitter) into the Module, and then plug a 7�W night light into the same Module along with the offending light/appliance.