Difference between revisions of "Setting ActiveEye For Night Only"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==Question== | ==Question== | ||
| + | |||
| + | ''How do I set the ActiveEye to only work at night?'' | ||
| + | |||
| + | ==Answer== | ||
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn: | To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn: | ||
| Line 5: | Line 9: | ||
Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows: | Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows: | ||
| − | The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn. | + | *The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn. |
| − | The red light blinks '''twice''' if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn. | + | *The red light blinks '''twice''' if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn. |
| − | The red light blinks '''three''' times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn. | + | *The red light blinks '''three''' times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn. |
| − | The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn. | + | *The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn. |
To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above. | To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above. | ||
Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks. | Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks. | ||
Revision as of 22:43, 13 September 2006
Question
How do I set the ActiveEye to only work at night?
Answer
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:
Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:
- The red light blinks once if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
- The red light blinks twice if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn.
- The red light blinks three times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn.
- The red light blinks four times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.
To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.
Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks.