Difference between revisions of "Differences Between the TM751 and RR501"
Jump to navigation
Jump to search
(→Answer) |
|||
| Line 1: | Line 1: | ||
==Question== | ==Question== | ||
| − | What is the difference between the RR501 and the TM751? | + | '''What is the difference between the RR501 and the TM751?''' |
==Answer== | ==Answer== | ||
Revision as of 01:32, 29 March 2007
Question
What is the difference between the RR501 and the TM751?
Answer
Both Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline.
The RR501 will respond to powerline commands. The TM751 will not.
The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed.
The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s.