XX70A Getting Started on a MAC

From X10Wiki
Revision as of 00:57, 8 January 2016 by X10douglas (talk | contribs)
Jump to navigation Jump to search

Please follow these few simple steps to get started. This might be all you need. You can then look at your owner's manual later for more setup options.

Xx70a-manual-pic.jpg MAC LOGOs.png

XX70A: AirSight Outdoor PTZ P2P HD IP Camera with One Button Setup - Quick Installation Guide (Using Safari Browser)



Introduction

You can access your camera's live video feed from a web browser on your Macintosh computer by following these steps.


Setup instructions for your tablet or smartphone can be found here.


Step 1: Hardware Installation

You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly.

  1. Install the Wi-Fi antenna.
  2. Plug the power adapter into the camera and into an AC outlet.
  3. Plug one end of the network cable into the camera, and the other end into your router/switch.


Network ctn.png


XX40A Network ctn.png


Step 2: Software Installation

Software inst.png


Install the IP Camera Search tool for Macintosh computers located here.


  • Click the IP Camera Tool icon to instantly run the program

MACDwnld.png



Create a Desktop Shortcut

To create a shortcut on your desktop:

  • Click on the Downloads icon in the Dock at the bottom of the display and choose Open in Finder

MACOpenFinder.png


  • Click on IP Camera Tool and then File and choose Make Alias in the drop down

MACMakeAlias.png


  • Drag the newly created shortcut to your Desktop

MACShortcut.png



Create a Dock Icon

To create a Dock icon:

  • Click on the Downloads icon in the Dock at the bottom of the display and choose Open in Finder

MACOpenFinder.png


  • Click the IP Camera Tool icon

MACFinder.png


  • Drag the icon out of the Finder window and onto the Dock

MACDrag.png


  • An icon for the IP Camera Tool now appears on the Dock.

MACDockIcon.png

Step 3: Real-time Video Demonstration

  • Click on the "IP Camera Tool" Dock icon or desktop shortcut to launch the IP Camera Tool.


  • Safari will ask for approval to run the program - Click Open

MACSafariWarn.png


  • Double-Click your camera in the list to launch the camera's Web Interface in a Safari web browser

MACIPCameraTool.png


  • When prompted - log into your camera"

Default username: admin

Default Password: (leave this field blank)


MAC LOGIN.png


  • Choose the appropriate browser "Sign In" option for your browser: Server Push Mode (For Safari, FireFox, Google Browser)

MACSafariSignInChoice.png



Step 4: How to use your camera Wirelessly

You should set up your camera using a network cable (wired) first before you attempt to use it wirelessly. (See Hardware Installation above).

  1. Make sure your router is a wireless router.
  2. Make sure the Wi-Fi antenna is installed on the camera.
  3. Determine if your router uses encryption, (see your router’s owner’s manual for how to do this), if it uses encryption, note the share key.
  4. Login to the camera using the IP Camera Tool, like you did when setting up with a network cable.
  5. When you see the screen below, click “Network” then ”Wireless Lan Settings” then click on “Scan”, wait and then click it again, when you see your camera in the Wireless LAN settings box, click on it.
  6. If there is no encryption, just click “Submit”, if there is encryption, input the share key, then click “Submit”.
  7. Unplug the network cable and wait about 30 seconds while the camera reboots.


XX36A Step 4B.png

Retrieved from "https://kbase.x10.com/index.php?title=XX70A_Getting_Started_on_a_MAC&oldid=13554"