NEW AirSight App Features

From X10Wiki
Revision as of 01:06, 9 January 2016 by X10douglas (talk | contribs)
Jump to navigation Jump to search

Here is a simple guide that will walk you through the features available in the AirSight App

NewAppLogo.JPG


Getting to know the AirSight app

Upon running the app for the first time you will be presented with the ADD CAMERA page

NEWAPP1.png


Use the icons along the bottom of the screen to navigate between the different tabs


Subsequent visits will bring you directly to the CAMERAS tab


NEWAPP2B.png



CAMERA Tab

After you've added your cameras to the app - the ADD CAMERA tab will show your list of cameras as well as their status

NEWAPP3B.png

  • GREEN = Online
  • YELLOW = Incorrect Password
  • BLACK = Offline


Use the EDIT CAMS button to delete cameras from your list or access their settings menu

NEWAPP4B.png



CAMERA SETTINGS

From the camera's SETTINGS menu you can:

  • Change the Camera's Password
  • Access the WiFi Settings
  • Adjust the Date/Time Settings
  • Access the Alarm Settings
  • Update Email Settings
  • Access the Motion Detection Settings
  • Adjust the SDCard settings
  • Check the Camera's Firmware Version
  • Set the Environment


NOTE: The PASSWORD field, while editable, will NOT change the P2P password for your camera. (See the Change Password Menu section below).

NEWAPP5B.png



Change Password Menu

You can change the P2P password for your camera from the CHANGE PASSWORD menu

  • OLD PWD: Type the password your want to change
  • NEW PWD: Type your newly chosen password
  • CONFIRM: Re-Type your newly chosen password
  • Tap SAVE


NEWAPP5.5.png



WiFi Menu

Use the WIFI menu to set a different wireless network

  • Locate your wireless network from the list of available networks
  • Type in your WiFi password (case sensitive) and tap OK

NEWAPP6B.png



Date/Time Settings Menu

Use the DATE/TIME SETTINGS menu to sync the camera's date and time with your smartphone or tablet

Please note that this feature is not supported on all models - the camera must be an XX69A, XX70A or newer to utilize this feature

NEWAPP7B.png



Alarm Settings Menu

If you have an external siren or output switch connected to the IO pins on the back of the camera you can access the settings for the inputs from the ALARM SETTINGS menu

More information regarding the I/O Pins can be found here.

NEWAPP8.png



Mail Settings Menu

Use the MAIL SETTINGS menu to enter the credentials for the email address you would like the camera to use to send notifications via email

Please note that this feature is not supported on all models - the camera must be an XX69A, XX70A or newer to utilize this feature

NEWAPP9.png



Motion Detection Menu

Use the MOTION DETECTION menu to turn motion detection ON/OFF, adjust the sensitivity of the detection, and set the required action when a motion event is triggered


NEWAPP10.png



SDCard Settings Menu

If your camera model includes an on board SDCard slot, you can check the available capacity of the SDCard, format the SDCard, and set the recording frequency to the SDCard from the SDCARD SETTINGS menu

NEWAPP11.png NEWAPP11B.png



Firmware Version Menu

The FIRMWARE VERSION menu displays your camera's current firmware version

NEWAPP13.png



Environmental Mode Menu

Use the ENVIRONMENT MODE menu to select the appropriate mode for the cameras viewing environment:

NEWAPP14.png


  • INDOOR MODE: Used for normal indoor environments (50-60Hz)

Power line frequency or mains frequency is the frequency of the oscillations of alternating current (AC) in an electric power grid transmitted from a power plant to the end-user. In large parts of the world this is 50 Hz, although here in America, and some parts of Asia it is typically 60 Hz. AirSight IP cameras have multi-voltage (100-240VAC, 50-60Hz) power supplies for use in both environments - the Light Frequency is simply to communicate to the software which one is in use - however it is unlikely that changing from 50Hz to 60Hz will provide a noticeable difference.


  • OUTDOOR MODE: Used for cameras mounted outdoors or facing out windows

NOTE: Facing a camera out a window renders them useless for night time viewing due to the reflection of the IR LEDs.




PHOTOS & VIDEOS TAB NEWAPP15.png PHOTOS NEWAPP16.png NEWAPP16B.png VIDOES NEWAPP17.png NEWAPP17B.png

SDCard TAB If your camera model includes an on board SDCard slot, you can access the snapshots and videos stored on the SDCard from the SDCARD tab NEWAPP18.png

MORE INFO TAB NEWAPP19.png Traffic Statistics NEWAPP20.png Help NEWAPP21.png




About Device Menu

The ABOUT menu displays the current firmware version of your camera

NEWAPP22.png



Live View

To view live video tap the image of your camera on the CAMERA tab to access the LIVE VIEW menu

LIVE VIDEO NEWAPP12.png NEWAPP12B.png


While your phone is in vertical orientation you can access all of the features available for your camera by clicking on the small icons located along the bottom of the screen:

File:NEWAPPXX.png


  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A and XX70A PTZ cameras require external mic and speaker -not included)
  • Set Preset Position
  • Call Preset Position


While the phone is in horizontal orientation you can access:

  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)

File:NEWAPPXX.png


If your camera model has the ability to zoom - you will notice additional buttons added: F Zoom.png

To zoom your camera in and out you can either pinch/spread the image with your fingers or use the


Zoom In F ZoomI.png and Zoom Out F ZoomO.png icons.


Record Video

To record live video simply tap the video camera icon to access the RECORD CONTROL menu

F MotionRecord.png


From the RECORD CONTROL menu you can start and stop your recordings.

F RecordControl.png


Snapshots

To take snapshots simply tap the camera icon

F SnapShot.png


You will receive a message that a snapshot was successfully saved to your PHOTOS folder of your phone.

F SnapShotSaved.png


Listen and Talk with Two-Way Audio

Most of the AirSight IP camera models include an on-board microphone and speaker providing two-way audio communication.

F Audio.png


For AirSight IP camera models that do not (XX60A PTZ) an external microphone and speaker are required to utilize this feature.

Simply tap the speaker icon to access the AUDIO CONTROL menu

AudioControl.png


The audio status box will let you know what mode the camera is currently in: Mute, Listen, or Speak.

F AudioStatus.png


Presets

Most of the AirSight IP camera models can pan and tilt and some even have the ability to zoom.

Use the preset feature to program up to 16 preset positions for your camera to quickly retrieve later.

F Preset.png


To program a preset position, pan/tilt/zoom to the desired location and tap the PRESET SAVE icon

F PresetSave.png


A numbered menu appears - tap a number to program that preset position

F PresetSaveChoose.png


To call that preset position - tap the PRESET icon

F PresetGo.png


A numbered menu appears - tap a number to call that preset position

Your camera will pan/tilt/zoom to the appointed position that you set.

F PresetGoChoose.png


Exit Live View

To exit the Live View menu simply tap the BACK button to return to your camera list to view other cameras.

F Back.png

EVENT Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

NewEvents.png


To access the list of events for each camera tap the ARROW to the right of the camera name to access it's EVENT LIST

NewEventsArrow.png NewEventList.png


Use the SEARCH button to quickly navigate to a specific event based on when the event occurred

EventListSearch.png


  • Note: Events cannot be deleted from the app - the only way to remove them from your phone is to delete the app.



LOCALRECORD Tab

Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS

LocalRecordTabNew.png


Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them

LRTN.png



Tap the ARROW to the right of the camera's name to access the PHOTO or VIDEO menu

LRT2N.png NewCameraPhotos.png



Tap the PHOTO or VIDEO to view

NewPhotoView.png NewPhotoViewIcons.png


Use the DELETE and SAVE icons to discard or save to your PHOTOS folder on your phone.



If this is the first time saving PHOTOS or VIDEO tap OK when prompted

NewAccessPhotoOk.png


The app will notify you the image was saved successfully - tap OK to return to your list of photos or videos

NewSaveToAlbum.png

ADD CAMERA Tab

Additional information on how to use these menus can be found here:


The ADD CAMERA menu lists all of the IP cameras found connected to the local network

TheNewAddCamera.png


Use the REFRESH button to refresh the list of cameras in "Camera Found! (0)" list if your camera doesn't automatically show up

RefreshAddCamera.png


Tap your camera in the "Camera Found! (0)" list to access the ADD CAMERA menu

TNACM.png


If you are not at the physical location of the camera you can manually add it by tapping the ADD button to enter in the camera's credentials

NewManualAddCamera.png TheNewAddCameraMenu.png


You can also add your camera by scanning the QR code sticker on the label

  • Note: If you have trouble viewing the camera after using this method we recommend deleting the camera from the app and re-installing using the steps found HERE


Focus the QR code in the center of the box on the screen - once the code is scanned it automatically opens the ADD CAMERA menu


QRADD.png QRScanMenu.png


Enter the P2P password for the camera (default 000000) and press SAVE

TNACM2.png



INFO Tab

Your current version of the app can be found on the APP INFO menu of the INFO tab

TheNewInfoTab.png



Related Products

Retrieved from "https://kbase.x10.com/index.php?title=NEW_AirSight_App_Features&oldid=13645"