Smart Power Line Command (PLC) Repeater Operating Instructions

From X10Wiki
Revision as of 18:10, 23 August 2016 by X10douglas (talk | contribs)
Jump to navigation Jump to search

Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units.

2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater: 1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command.

Retrieved from "https://kbase.x10.com/index.php?title=Smart_Power_Line_Command_(PLC)_Repeater_Operating_Instructions&oldid=13867"