Setup to Email Pictures From Vanguard Software
Jump to navigation
Jump to search
Questions How do I setup my software to email me pictures? Answer Follow these steps to setup Vanguard software to email snapshots when motion is detected:
- Click on the Options tab on the right-hand side. Once Options is open, select the Motion tab on the left-hand side, and you should see the screen below:
[img src="
"][/l1>
- Add the desired motion sensor; select its House/Unit code from the drop-down menu, and then select the camera you would like to associate with that motion sensor.
- Click the Configure button to bring up the motion sensor configuration window as shown below:
[img src="
"][/l1>
- Set the desired frequency and duration for the action.
- Click OK; then click on the Email tab and you will see the screen below:
[img src="
"][/l1>
- Enter the appropriate email address information, and add it to the address book; then select OK.
Repeat these steps for each additional camera you setup. Related Articles [img src="http://site.x10.com/?Z3gxT2tiYXNlYXJ0aWNsZTEuZGF0=RND%7Ckbasearticle"]