Setting Up Video Sender with a Game Console

From X10Wiki
Revision as of 22:20, 20 March 2006 by X10admin (talk | contribs)
Jump to navigation Jump to search

Introduction

This guide should help you in quickly setting up the X10 Video Sender with a Game Console.

Setup

Unpack these items. Disconnect your game system from your TV.

vidsend_1_parts.gif

Connect the wireless video receiver to power and plug it into a wall outlet.

vidsend_2_rx_power.gif

Connect the video receiver to the TV where your game system was connected.

vidsend_3_rx_rca.gif

Connect the video transmitter to your game system, plug it into power, and turn it on.

vidsend_4_tx_game.gif

Select your TV's video input just like you would for your game system. Your game should appear on screen.

vidsend_5_video_select.jpg

Adjust the antennas on the transmitter and receiver to improve the picture on your TV. Point the sides marked with 4 squares toward each other.

Alternate Receiver Setup: Coaxial Connection

If your TV does not have RCA audio/video inputs, or if they are already in use, you can connect the Video Receiver to your TV using the coaxial connection. Instead of following Step 3 (above), do the following:

  • Find the included coaxial cable.
  • Connect one end of the coaxial cable to the coaxial input on your TV. It might be labeled "coax," "cable," or even "antenna."
  • Connect the other end of the coaxial cable to the output on the Video Receiver.
  • Plug the Video Receiver into power, and make sure the power switch on its left side is turned on.
  • Use the TV CHANNEL switch on the bottom of the Video Receiver to select the channel on which to display video from the Video Receiver--Channel 3 or Channel 4.

To view the Video Sender transmission, change the channel on your TV to the one selected above.

Related Articles

Setting Up Video Sender with Tivo

Key Topics: video,sender,receiver,transmitter,wireless,audio,video,tivo
Relates to:VK54A,VR30A,VT32A

Setting Up Video Sender with a DVR

Key Topics: video,sender,receiver,transmitter,wireless,audio,video,dvr
Relates to:VK54A,VR30A,VT32A

Setting Up Video Sender with a DVD Player

Key Topics: video,sender,receiver,transmitter,wireless,audio,video,dvd,player
Relates to:VK54A,VR30A,VT32A

Setting Up Video Sender with a VCR

Key Topics: video,sender,receiver,transmitter,wireless,audio,video,vcr,vhs,cassette,recorder
Relates to:VK54A,VR30A,VT32A

Setting Up Video with a Cable Box

Key Topics: video,sender,receiver,transmitter,wireless,audio,video,cable,box
Relates to:VK54A,VR30A,VT32A

Setting Up Video Sender with a Satellite Receiver

Key Topics: video,sender,receiver,transmitter,wireless,audio,video,satellite,dss,directv,direct,tv
Relates to:VK54A,VR30A,VT32A
Retrieved from "https://kbase.x10.com/index.php?title=Setting_Up_Video_Sender_with_a_Game_Console&oldid=1983"