Vanguard Zoom Camera Setup
Introduction
This guide should help you get started quickly with the X10 Vanguard Zoom Camera
Setup
Unpack these items.
Connect the camera to its power supply and plug it into a wall outlet.
Put 4 AAA batteries (not included) into the remote control.
Connect the wireless video receiver to power and plug it into a wall outlet.
Connect the video receiver to your TV.
Turn the video receiver on and flip up the antenna. Point the antenna toward the camera.
Select your TV's video input (or try channel 0 and then Channel Down). The camera's image should appear.
Related Articles
Problems Opening Remote Viewer
Key Topics: gate, x10, com, remote, internet, viewer, client, server, site, vanguard
Relates to: VK77A, XC21A, XC21B, CR15A, SW26A, VA11A, CM19A
Troubleshooting Picture Quality on PC
Key Topics: quality, picture, video
Relates to: VK77A, XC21A, XC21B, CR15A
Camera Video Display Problems on TV
Key Topics: video, camera, xcam2, picture, tv, display, image, channel, input
Relates to: VK77A, XC21A, XC21B, CR15A
Troubleshooting Picture Quality on TV
Key Topics: quality, picture, video
Relates to: VK77A, XC21A, XC21B, CR15A
Remote Control Doesn't Control Vanguard Camera
Key Topics: focus, iris, c1, c2, c4, c3, cr15a
Relates to: VK77A, XC21A, XC21B, CR15A
Key Topics: focus, auto, cap
Relates to: VK77A, XC21A, XC21B, CR15A
Remove Camera Text from Video Display
Key Topics: text, name, camera, id, display
Relates to: VK77A, XC21A, XC21B, CR15A